How to replace the exhaust heat shield for the center bearing on 2008 Cadillac STS?

Starting the Exhaust Heat Shield center bearing replacement requires the vehicle to raise and support for proper installation. Next remove the bolts which secure the heat shield at the center bearing to the Drive Shaft center bearing element. The heat shield should be tilted to one side and slowly pulled out from its position between the body and Drive Shaft center bearing and exhaust pipes before being removed from the vehicle. Place the new heat shield after its insertion between the body and Drive Shaft center bearing and exhaust pipes with holes matching the center bearing hole pattern. Install the bolts on the center bearing heat shield while tightening them to 8 n.m (71 lb in). Finally, lower the vehicle.

OEM 2008 Cadillac STS Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Heat Shields found

View related parts
2008 Cadillac STS Heat Shield, Driver Side Part Number: 12607338
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 12567838
- Item Weight: 1.30 Pounds
- Item Dimensions: 20.2 x 11.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12607338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Heat Shield, Passenger Side Part Number: 12576372
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 2.50 Pounds
- Item Dimensions: 23.9 x 8.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12576372
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Heat Shield Part Number: 12617267
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Replaces: 12580707
- Item Weight: 2.10 Pounds
- Item Dimensions: 14.6 x 8.0 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12617267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS
View related parts
2008 Cadillac STS Heat Shield Part Number: 12580706
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Item Weight: 2.00 Pounds
- Item Dimensions: 13.5 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12580706
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS

2008 Cadillac STS Exhaust Heat Shield

With a comprehensive array of OEM 2008 Cadillac STS Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac STS Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac STS Exhaust Heat Shield Parts and Q&A

Q: How to replace the exhaust heat shield for the center bearing on 2008 Cadillac STS?
A: Starting the Exhaust Heat Shield center bearing replacement requires the vehicle to raise and support for proper installation. Next remove the bolts which secure the heat shield at the center bearing to the Drive Shaft center bearing element. The heat shield should be tilted to one side and slowly pulled out from its position between the body and Drive Shaft center bearing and exhaust pipes before being removed from the vehicle. Place the new heat shield after its insertion between the body and Drive Shaft center bearing and exhaust pipes with holes matching the center bearing hole pattern. Install the bolts on the center bearing heat shield while tightening them to 8 n.m (71 lb in). Finally, lower the vehicle.