Make sure this part fits

GM 12617267
Heat Shield

2004-2011 GM

Customer Questions & Expert Answers (21)
GM 12617267 Heat Shield
  • Part Description
    Shield, Exhaust Manifold; Exhaust Heat Shield
  • Replaces
    12580707
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2011 Cadillac CTSBase, Luxury, Performance, Premium6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS
    2010-2011 Chevrolet CamaroLS, LT6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12617267 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12617267 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the center bearing heat shield be secured for the 2005 Cadillac CTS? Posted by Customer
    A:
    Secure the center bearing heat shield with bolts, tightening them to 8 Nm (71 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done if necessary regarding the lower exhaust manifold heat shield for the 2009 Cadillac CTS? Posted by Customer
    A:
    Remove the lower exhaust manifold heat shield retainers and the lower exhaust manifold heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after securing the heat shield for the 2008 Cadillac CTS? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step in the installation process for the 2006 Cadillac CTS? Posted by Customer
    A:
    Attach the lower insulator to the oil level indicator and exhaust gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you ensure proper installation of the new heat shield for the 2007 Cadillac CTS? Posted by Customer
    A:
    Ensure the holes in the heat shield align with those in the center bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the Exhaust Manifold Heat Shield on the left side (LP1, LY7) for the 2007 Cadillac CTS? Posted by Customer
    A:
    Begin by removing the intermediate steering shaft and the upper bolts of the heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after placing the lower insulator for the 2005 Cadillac CTS? Posted by Customer
    A:
    Place the upper insulator onto the oil level indicator tube, if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you remove the heat shield for the 2006 Cadillac SRX? Posted by Customer
    A:
    Tilt the heat shield to either side and slide it out from between the body, the drive shaft center bearing, and the exhaust pipes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How should the bolts be secured during installation for the 2008 Cadillac SRX? Posted by Customer
    A:
    Install the bolts to secure the center bearing heat shield, tightening them to 8 N.m (71 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the process for installing the new heat shield for the 2008 Cadillac STS? Posted by Customer
    A:
    Slide the new heat shield in between the body, the drive shaft center bearing, and the exhaust pipes, ensuring the holes in the heat shield align with those in the center bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the torque specification for tightening the bolts for the 2007 Cadillac STS? Posted by Customer
    A:
    Tighten them to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed to access the center bearing heat shield for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the bolts securing the center bearing heat shield to the center bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust heat shield for the center bearing for the 2009 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the right exhaust manifold heat shield (LY7) for the 2005 Cadillac SRX? Posted by Customer
    A:
    First, remove the exhaust manifold heat shield bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the procedure for installing the exhaust manifold heat shield for the 2004 Cadillac SRX? Posted by Customer
    A:
    Position the exhaust manifold heat shield and install the bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after tightening the upper bolts for the 2009 Cadillac SRX? Posted by Customer
    A:
    Raise the vehicle again to tighten the lower exhaust manifold heat shield bolt and the exhaust manifold heat shield bolts to 10 Nm (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should you be cautious of during this procedure for the 2008 Cadillac STS? Posted by Customer
    A:
    Be cautious of exhaust service precautions to avoid any potential hazards.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after aligning the heat shield for the 2005 Cadillac STS? Posted by Customer
    A:
    Install the bolts securing the center bearing heat shield to the center bearing, tightening them to 8 Nm (71 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the proper torque for tightening the bolts for the 2009 Cadillac STS? Posted by Customer
    A:
    Tighten the bolts to 10 Nm (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step for installation of the new heat shield for the 2007 Cadillac SRX? Posted by Customer
    A:
    Slide the new heat shield in between the body, the drive shaft center bearing, and the exhaust pipes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield 12617267 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12617267 Heat Shield is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12617267 Heat Shield fits certain Chevrolet Camaro models, as well as Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 12617267 maintains top performance when functioning as the Shield, Exhaust Manifold; Exhaust Heat Shield unit. The component 12617267 is constructed from durable material and its dimensions span 14.6 x 8.0 x 7.0 inches while weighing 2.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12617267 has available replacement options 12580707. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.