How to replace the exhaust heat shield for the center bearing on Cadillac STS?

Starting the Exhaust Heat Shield center bearing replacement requires the vehicle to raise and support for proper installation. Next remove the bolts which secure the heat shield at the center bearing to the Drive Shaft center bearing element. The heat shield should be tilted to one side and slowly pulled out from its position between the body and Drive Shaft center bearing and exhaust pipes before being removed from the vehicle. Place the new heat shield after its insertion between the body and Drive Shaft center bearing and exhaust pipes with holes matching the center bearing hole pattern. Install the bolts on the center bearing heat shield while tightening them to 8 n.m (71 lb in). Finally, lower the vehicle.

OEM Cadillac STS Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Heat Shields found

View related parts
Cadillac STS Heat Shield
Part Number: 12617267
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Replaces: 12580707
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2011 Cadillac STS | Base, Platinum | 6 Cyl 3.6 L GAS
View related parts
Cadillac STS Heat Shield, Driver Side
Part Number: 12607338
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 12567838
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Cadillac STS | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac STS Heat Shield
Part Number: 12580706
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2011 Cadillac STS | Base, Platinum | 6 Cyl 3.6 L GAS
View related parts
Cadillac STS Heat Shield, Passenger Side
Part Number: 12576372
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Cadillac STS | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

Cadillac STS Exhaust Heat Shield

Our website offers an extensive catalog of genuine Cadillac STS Exhaust Heat Shield at unbeatable prices. Every OEM Cadillac STS Exhaust Heat Shield comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac STS Exhaust Heat Shield Parts Questions & Experts Answers

Heat Shield
12580706
Q: How to replace the exhaust heat shield for the center bearing on Cadillac STS?
A: Starting the Exhaust Heat Shield center bearing replacement requires the vehicle to raise and support for proper installation. Next remove the bolts which secure the heat shield at the center bearing to the Drive Shaft center bearing element. The heat shield should be tilted to one side and slowly pulled out from its position between the body and Drive Shaft center bearing and exhaust pipes before being removed from the vehicle. Place the new heat shield after its insertion between the body and Drive Shaft center bearing and exhaust pipes with holes matching the center bearing hole pattern. Install the bolts on the center bearing heat shield while tightening them to 8 n.m (71 lb in). Finally, lower the vehicle.