How to replace the harmonic balancer on Buick Lucerne?

The first step for crankshaft balancer replacement consists of removing the Drive Belt together with wheel house liner and torque converter covers. The flywheel holder (J 37096) must be installed to stop the flywheel from turning; then remove and discard the crankshaft balancer bolt while maintaining the Crankshaft Pulley connected to the crankshaft balancer during service as a single unit. After installing the crankshaft balancer puller (J 38197-A) employees need to remove the crankshaft balancer before taking out the puller itself. Apply engine oil evenly onto both the seal contact surface of the front engine cover as well as the crankshaft balancer before product installation. The installation of the new crankshaft balancer requires use of the torque angle meter (J 45059) to stop the flywheel from spinning during crankshaft bolt tightening. Install the new crankshaft balancer along with its bolt. The bolt requires tightening to 150 n.m (111 lb ft) while the torque angle meter measures 76 degrees additional angle before it is removed from the bolt. The last steps involve replacing torque converter covers together with wheel house liner and Drive Belt while conducting the ckp system variation learn procedure.

OEM Buick Lucerne Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Harmonic Balancers found

View related parts
Buick Lucerne Crankshaft Balance Part Number: 12618249
$144.70 MSRP: $271.74
You Save: $127.04 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley-Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley
- Replaced by: 19367394
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS
View related parts
Buick Lucerne Crankshaft Pulley Part Number: 12621646
$92.20 MSRP: $156.90
You Save: $64.70 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 12581298, 12588034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Lucerne Vibration Damper Part Number: 12571692
$91.34 MSRP: $142.46
You Save: $51.12 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Engine Crankshaft And Camshaft Balancer; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Balance; Pulley; Balancer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
View related parts
Buick Lucerne Vibration Damper Part Number: 12563265
Product Specifications
- Other Name: Pulley; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Replaces: 24505177
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Buick Lucerne | CX, CXL | 6 Cyl 3.8 L GAS

Buick Lucerne Harmonic Balancer

Want to cut long-term maintenance and repair costs? Choose OEM Harmonic Balancer. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Lucerne parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Lucerne Harmonic Balancer includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick Lucerne Harmonic Balancer is a main part that greatly contributes to the performance and durability of the Buick Lucerne, a full size luxury car manufactured from 2005 to 2011. This Harmonic Balancer serves as an important mechanism used to balance the engine, minimizing the conventional torsional distortion and vibrations in the crankshaft which is very essential for the efficiency and safety of the engine. The Buick Lucerne Harmonic Balancer is very essential because it offers optimal performance by sustaining the wear and tear of the car engine. It consists of a strong metal core, bulky inertia disc, packed rubber ring designed to absolve twisting force of crankshaft, thereby minimizing on any possible damage on the engine. This Harmonic Balancer can be used for a wide range of Buick Lucerne models and can also be fitted for standard and high-performance engines where the firm offers meet or even go above safe requirements. The Buick Lucerne Harmonic Balancer offered the advanced features in its manufacturing such as durability against working conditions such as heat and quality of the road. Also, Buick Lucerne has many charms in its design that fold competently with the advertised technologies such as the Magnetic Ride Control, which helps in making the ride better than with the Harmonic Balancer in terms of smooth and stability of the car. This Buick Lucerne Harmonic Balancer is the epitome of what Buick has to offer to the automobile marketplace- reliability, performance, and quality made possible through innovation.

Buick Lucerne Harmonic Balancer Parts Questions & Experts Answers

Vibration Damper
12571692
Q: How to replace the harmonic balancer on Buick Lucerne?
A:
The first step for crankshaft balancer replacement consists of removing the Drive Belt together with wheel house liner and torque converter covers. The flywheel holder (J 37096) must be installed to stop the flywheel from turning; then remove and discard the crankshaft balancer bolt while maintaining the Crankshaft Pulley connected to the crankshaft balancer during service as a single unit. After installing the crankshaft balancer puller (J 38197-A) employees need to remove the crankshaft balancer before taking out the puller itself. Apply engine oil evenly onto both the seal contact surface of the front engine cover as well as the crankshaft balancer before product installation. The installation of the new crankshaft balancer requires use of the torque angle meter (J 45059) to stop the flywheel from spinning during crankshaft bolt tightening. Install the new crankshaft balancer along with its bolt. The bolt requires tightening to 150 n.m (111 lb ft) while the torque angle meter measures 76 degrees additional angle before it is removed from the bolt. The last steps involve replacing torque converter covers together with wheel house liner and Drive Belt while conducting the ckp system variation learn procedure.