Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; Air Temperature Sensor; In-Car Sensor; Sensor, A/C Electric Temperature And Motor Control
Fits the following Cadillac Models:
Escalade | 2007-2014 | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Escalade ESV | 2007-2014 | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Escalade EXT | 2007-2013 | Base, Luxury, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Sensor, Ambient Outside Air Temperature; Ambient Air Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Outside Temperature Sensor; Sensor
Replaces: 16145854
Fits the following Cadillac Models:
DeVille | 1994-2005 | Base, Concours, d'Elegance, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
Eldorado | 1993-2002 | Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
Seville | 1993-2004 | Base, SLS, STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; Aspirator, A/C Electric Temperature And Motor Control; Sensor, A/C Electric Temperature And Motor Control
Fits the following Cadillac Models:
Fleetwood | 1993-1996 | Base, Brougham | 8 Cyl 5.7 L GAS
Other Name: Sensor, Air Conditioner Electric Temperature And Motor Control; In-Car Temperature Sensor; In-Car Sensor; Sensor; Sensor, A/C Electric Temperature And Motor Control
Fits the following Cadillac Models:
DeVille | 1997-1999 | Base, Concours, d'Elegance | 8 Cyl 4.6 L GAS
Q: How to replace the Ambient Temperature Sensor on Cadillac CTS?
A: First to replace the Ambient Air Temperature Sensor, you have to disconnect the connector of the ambient air temperature sensor, then release the sensor from the clip and remove it away from the vehicle. For installation, put the new ambient air temperature sensor into position, clip it into an engagement, and then go ahead to connect the ambient air temperature electrical connector.
Q: How to service the Ambient Temperature Sensor on Cadillac DeVille?
A: To service the ambient temperature sensor: disconnect the electrical connector from ambient temperature sensor, remove the retainer and pull out the ambient temperature sensor from the vehicle. For installation mount the ambient temperature sensor appropriately, install the retainer and lastly reconnect the electrical connector to the ambient temperature sensor .
Q: How to Replace the Ambient Temperature Sensor for Outside on Cadillac XLR?
A: The first step for replacing the ambient air temperature gage sensor involves removing both the knee bolster and the driver information center retaining screw. First disconnect the driver information center from the instrument panel (I/P) then disconnect the inside Air Temperature Sensor from the driver information center (DIC) bezel followed by removal of the electrical connector. The installation requires the inside Air Temperature Sensor electrical connector to connect after pushing the sensor entirely into the dic bezel. Next connect the driver information center to the i/p and install the retaining screw and tighten it to 1.9 n.m (17 lb in). Finally, reinstall the knee bolster.