How to replace the left engine mount bracket on Cadillac SRX?

One must start by supporting and elevating the automobile before replacing the left Engine Mount Bracket. A screw jack equipped with a wooden block under the Oil Pan should be installed to support the vehicle when removing the lower Engine Mount retaining nut. The screw jack should elevate the engine to eliminate mount weight before you detach both the upper Engine Mount retaining nut and the mount using care to prevent deformation or bending of the Engine Mount heat shield. Beginning with the left Engine Mount Bracket keeping bolts you should proceed to also remove the bracket itself. Begin the installation by securing the left Engine Mount Bracket along with its bolts then tighten them to 60 n.m (44 lb ft). Fit the Engine Mount to the vehicle while you should next install and torque the upper Engine Mount retaining nut to 80 n.m (59 lb ft). Lower the engine using a screw jack while the weight rests on the mount before installing the lower retaining nut which should be tightened to 80 n.m (59 lb ft). After completion you should remove both the screw jack and block of wood from under the Oil Pan while lowering the vehicle.

OEM Cadillac SRX Engine Mount Bracket

Engine Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Engine Mount Brackets found

View related parts
Cadillac SRX Mount Bracket, Passenger Side
Part Number: 25762621
$7.81 MSRP: $12.23
You Save: $4.42 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Passenger Side
- Replaced by: 10360746
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009, 2004-2006 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Mount Bracket, Driver Side
Part Number: 25762620
$7.84 MSRP: $12.28
You Save: $4.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Driver Side
- Replaced by: 10360745
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Mount Bracket, Passenger Side
Part Number: 25756322
$8.30 MSRP: $13.00
You Save: $4.70 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Passenger Side
- Replaced by: 10360744
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Mount Bracket
Part Number: 13227756
$71.39 MSRP: $111.84
You Save: $40.45 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Engine Side; Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Mount Bracket
Part Number: 13227755
$73.62 MSRP: $115.31
You Save: $41.69 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Cadillac SRX | Performance, Premium | 6 Cyl 2.8 L GAS
View related parts
Cadillac SRX Motor Mount, Passenger Side
Part Number: 25971089
$26.38 MSRP: $41.32
You Save: $14.94 (37%)
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Front Mount; Mount, Engine Mount Dampening
- Position: Passenger Side
- Replaces: 10360738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Mount Bracket, Passenger Side
Part Number: 10360747
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 25716470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Mount Bracket, Driver Side
Part Number: 10360743
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Replaces: 25756321
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Mount Bracket, Passenger Side
Part Number: 10360742
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 25756320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS

Cadillac SRX Engine Mount Bracket

Our website offers an extensive catalog of genuine Cadillac SRX Engine Mount Bracket at unbeatable prices. Every OEM Cadillac SRX Engine Mount Bracket comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac SRX Engine Mount Bracket Parts Questions & Experts Answers

Motor Mount, Passenger Side
25971089
Q: How to replace the left engine mount bracket on Cadillac SRX?
A: One must start by supporting and elevating the automobile before replacing the left Engine Mount Bracket. A screw jack equipped with a wooden block under the Oil Pan should be installed to support the vehicle when removing the lower Engine Mount retaining nut. The screw jack should elevate the engine to eliminate mount weight before you detach both the upper Engine Mount retaining nut and the mount using care to prevent deformation or bending of the Engine Mount heat shield. Beginning with the left Engine Mount Bracket keeping bolts you should proceed to also remove the bracket itself. Begin the installation by securing the left Engine Mount Bracket along with its bolts then tighten them to 60 n.m (44 lb ft). Fit the Engine Mount to the vehicle while you should next install and torque the upper Engine Mount retaining nut to 80 n.m (59 lb ft). Lower the engine using a screw jack while the weight rests on the mount before installing the lower retaining nut which should be tightened to 80 n.m (59 lb ft). After completion you should remove both the screw jack and block of wood from under the Oil Pan while lowering the vehicle.

Related Cadillac SRX Parts

Browse Cadillac SRX Engine Mount Bracket by Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004