Make sure this part fits

GM 10360747
Mount Bracket, Passenger Side

2004-2010 GM

Customer Questions & Expert Answers (36)
GM 10360747 Mount Bracket, Passenger Side
  • Part Description
    Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
  • Position
    Passenger Side
  • Replaces
    25716470
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10360747 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10360747 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after supporting the transmission for the 2006 Cadillac STS? Posted by Customer
    A:
    Detach the transmission vent hose from the retainers on the mount assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after removing the old transmission mount for the 2005 Cadillac SRX? Posted by Customer
    A:
    Place the new transmission mount onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step in the installation process for the 2005 Cadillac SRX? Posted by Customer
    A:
    Install the left engine mount bracket and secure it with the retaining bolts, tightening them to 60 Nm (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after installing the upper engine mount retaining nut for the 2008 Cadillac SRX? Posted by Customer
    A:
    Lower the engine with the screw jack until the weight is on the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the M 8 engine mount bracket mounting bolt for the 2006 Cadillac SRX? Posted by Customer
    A:
    Tighten it to 38 Nm (28 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after inserting the block of wood for the 2004 Cadillac SRX? Posted by Customer
    A:
    Raise the transmission/transaxle to remove weight from the mount and create slight tension in the rubber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step in the installation process for the 2004 Cadillac SRX? Posted by Customer
    A:
    Place the new engine mount onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2010 Cadillac STS? Posted by Customer
    A:
    Position the transmission mount support assembly back into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What needs to be detached from the mount assembly for the 2009 Cadillac SRX? Posted by Customer
    A:
    The transmission vent hose from the six retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step after installing the engine mount for the 2006 Cadillac STS? Posted by Customer
    A:
    Reinstall the left engine mount bracket and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the right engine mount bracket for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the right engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for the M 8 engine mount bracket mounting bolt for the 2007 Cadillac STS? Posted by Customer
    A:
    Tighten it to 38 N.m (28 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed after raising for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the right exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step in the process for the 2005 Cadillac STS? Posted by Customer
    A:
    Reinstall the right exhaust manifold and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be installed under the oil pan for support for the 2006 Cadillac SRX? Posted by Customer
    A:
    A screw jack with a block of wood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after completing the installation for the 2008 Cadillac SRX? Posted by Customer
    A:
    Reinstall the exhaust system and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you secure the engine mount for the 2004 Cadillac SRX? Posted by Customer
    A:
    Install the engine mount to the vehicle and secure the upper engine mount retaining nut, tightening it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What conditions should you observe for that necessitate replacement of the transmission/transaxle mount for the 2005 Cadillac STS? Posted by Customer
    A:
    The hard rubber surface shows heat check cracks, the rubber is separated from the metal plate, or the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What needs to be detached from the mount assembly for the 2008 Cadillac STS? Posted by Customer
    A:
    The transmission vent hose from the retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after installing the top engine mount retaining nut for the 2008 Cadillac STS? Posted by Customer
    A:
    Install the left engine mount and engine mount bracket assembly, followed by the left engine mount bracket retaining bolts, which should be tightened to 60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after removing the lower engine mount retaining nut for the 2008 Cadillac SRX? Posted by Customer
    A:
    Raise the engine using the screw jack until the weight is removed from the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the transmission rear mount on a 5L40-E/5L50-E automatic transmission for the 2009 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What do you do after removing the engine mount retaining nut for the 2007 Cadillac STS? Posted by Customer
    A:
    Take out the engine mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the transmission be supported during the replacement for the 2007 Cadillac SRX? Posted by Customer
    A:
    Support the transmission with a suitable jack and a block of wood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be ensured while removing the upper retaining nut for the 2007 Cadillac SRX? Posted by Customer
    A:
    Do not distort or bend the engine mount heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What nuts need to be removed to take out the engine mount for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the right and left engine mount lower nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the mounting bolts for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the engine mount bracket from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed after supporting the engine for the 2009 Cadillac SRX? Posted by Customer
    A:
    The lower engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install the left engine mount bracket and its retaining bolts, tightening them to 60 Nm (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed after raising for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the right engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you install the new engine mount for the 2008 Cadillac STS? Posted by Customer
    A:
    Position the engine mount onto the vehicle and install the upper engine mount retaining nut, tightening it to 80 N.m (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the left engine mount for the 2005 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the transmission mount on a 6L50/6L80/6L90 automatic transmission for the 2007 Cadillac STS? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the first step to replace the left engine mount bracket for the 2008 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mount Bracket, Passenger Side 10360747 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10360747 Mount Bracket, Passenger Side is available in the market under the name GM Engine Mount, Motor And Transmission Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10360747 Mount Bracket, Passenger Side fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 10360747 maintains top performance when functioning as the Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount unit at its Passenger Side. The component 10360747 is constructed from durable material and its dimensions span 6.1 x 5.6 x 4.6 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10360747 has available replacement options 25716470. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.