How to replace the right side engine mount (w/RWD) on 2008 Cadillac SRX?

Vehicle elevation and vehicle support are necessary before beginning replacement of right side Engine Mount for rear-wheel-drive vehicles. A screw jack with a wood block under the Oil Pan should be installed before the lower Engine Mount retaining nut can be removed. Begin with raising the engine through the screw jack until the mount becomes weightless followed by the upper Engine Mount retaining nut and Engine Mount removal. Place the Engine Mount onto the vehicle before torquing the upper Engine Mount retaining nut to 80 n.m (59 lb ft). After placing the weight on the mount through engine lowering with the screw jack install both the Engine Mount retaining nuts and tighten each one to 80 n.m (59 lb ft). Lift the vehicle to lower position then eliminate the jack screw together with the block of wood which were under the Oil Pan.

OEM 2008 Cadillac SRX Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
2008 Cadillac SRX Motor Mount, Driver Side Part Number: 22887776
$122.89 MSRP: $209.23
You Save: $86.34 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Driver Side
- Replaces: 10360737, 25971088, 25792213
- Item Weight: 4.50 Pounds
- Item Dimensions: 8.1 x 5.5 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22887776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2008 Cadillac SRX Motor Mount Part Number: 22887775
$122.06 MSRP: $207.81
You Save: $85.75 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Engine Mount; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 10360736, 25764959, 25764956, 19210426, 25741434, 25971085, 25737318, 25744159
- Item Weight: 4.50 Pounds
- Item Dimensions: 8.0 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22887775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac SRX Mount Bracket, Passenger Side Part Number: 25756322
$8.30 MSRP: $13.00
You Save: $4.70 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Passenger Side
- Replaced by: 10360744
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.7 x 4.9 x 4.1 inches
- Condition: New
- SKU: 25756322
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2008 Cadillac SRX Mount Bracket, Driver Side Part Number: 25762620
$7.84 MSRP: $12.28
You Save: $4.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Driver Side
- Replaced by: 10360745
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 8.5 x 6.3 inches
- Condition: New
- SKU: 25762620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac SRX Motor Mount, Driver Side Part Number: 25971093
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Driver Side
- Replaces: 25764957, 25816503
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.5 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2008 Cadillac SRX Motor Mount, Driver Side Part Number: 25971086
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Driver Side
- Replaces: 15880912
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.2 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971086
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac SRX Motor Mount, Passenger Side Part Number: 25971087
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 10360741, 15212625, 15880913
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.3 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac SRX Motor Mount, Passenger Side Part Number: 25971089
$26.38 MSRP: $41.32
You Save: $14.94 (37%)
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Front Mount; Mount, Engine Mount Dampening
- Position: Passenger Side
- Replaces: 10360738
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.2 x 5.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2008 Cadillac SRX Mount Bracket, Passenger Side Part Number: 10360747
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 25716470
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.1 x 5.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10360747
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac SRX Mount Bracket, Passenger Side Part Number: 10360742
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 25756320
- Item Weight: 1.90 Pounds
- Item Dimensions: 10.1 x 8.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10360742
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2008 Cadillac SRX Mount Bracket, Driver Side Part Number: 10360743
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Replaces: 25756321
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.6 x 5.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10360743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS

2008 Cadillac SRX Engine Mount

With a comprehensive array of OEM 2008 Cadillac SRX Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac SRX Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac SRX Engine Mount Parts and Q&A

Q: How to replace the right side engine mount (w/RWD) on 2008 Cadillac SRX?
A: Vehicle elevation and vehicle support are necessary before beginning replacement of right side Engine Mount for rear-wheel-drive vehicles. A screw jack with a wood block under the Oil Pan should be installed before the lower Engine Mount retaining nut can be removed. Begin with raising the engine through the screw jack until the mount becomes weightless followed by the upper Engine Mount retaining nut and Engine Mount removal. Place the Engine Mount onto the vehicle before torquing the upper Engine Mount retaining nut to 80 n.m (59 lb ft). After placing the weight on the mount through engine lowering with the screw jack install both the Engine Mount retaining nuts and tighten each one to 80 n.m (59 lb ft). Lift the vehicle to lower position then eliminate the jack screw together with the block of wood which were under the Oil Pan.