How to replace the Motor and Transmission Mount on a 6L50/6L80/6L90 automatic transmission in an all-wheel-drive on 2007 Cadillac SRX?

Start by raising and supporting the vehicle when replacing the transmission mount on a 6l50/6l80/6l90 automatic transmission in all-wheel-drive vehicles. Begin by taking out the exhaust system while you support the transmission with a suitable jack along with a block of wood. You should start by detaching the transmission vent hose from its six retainers that secure the mount assembly before you can remove the transmission mount support to body mounting bolts alongside the transmission mount support to transfer case mounting bolts. Extract the transmission mount support assembly from your vehicle. Installation follows mounting the transmission support assembly by properly torquing the transmission bolts in sequence. Begin by hand-tightening the transmission mount support to transfer case mounting bolts and then fasten the right side bolt to 110 n.m (81 lb ft) followed by the left side bolt to 110 n.m (81 lb ft). After positioning the transmission mount support assembly back into position, tighten its body mounting bolts at 60 n.m (44 lb ft). Return the transmission vent hose to its six retaining points on the mount assembly while removing the transmission jack before installing the exhaust system and completing the vehicle's descent.

OEM 2007 Cadillac SRX Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Motor And Transmission Mounts found

View related parts
2007 Cadillac SRX Motor Mount, Driver Side
Part Number: 22887776
$119.44 MSRP: $205.13
You Save: $85.69 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Driver Side
- Replaces: 10360737, 25971088, 25792213
- Item Weight: 4.50 Pounds
- Item Dimensions: 8.1 x 5.5 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22887776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac SRX Motor Mount
Part Number: 22887775
$118.63 MSRP: $203.74
You Save: $85.11 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Engine Mount; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 10360736, 25764959, 25764956, 19210426, 25741434, 25971085, 25737318, 25744159
- Item Weight: 4.50 Pounds
- Item Dimensions: 8.0 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22887775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Mount Bracket, Passenger Side
Part Number: 25756322
$8.30 MSRP: $13.00
You Save: $4.70 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Passenger Side
- Replaced by: 10360744
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.7 x 4.9 x 4.1 inches
- Condition: New
- SKU: 25756322
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac SRX Mount Bracket, Driver Side
Part Number: 25762620
$7.84 MSRP: $12.28
You Save: $4.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Driver Side
- Replaced by: 10360745
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.3 x 8.5 x 6.3 inches
- Condition: New
- SKU: 25762620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Motor Mount, Driver Side
Part Number: 25971093
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Front Mount; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Driver Side
- Replaces: 25764957, 25816503
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.5 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac SRX Motor Mount, Driver Side
Part Number: 25971086
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Position: Driver Side
- Replaces: 15880912
- Item Weight: 4.70 Pounds
- Item Dimensions: 8.2 x 5.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971086
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Motor Mount, Passenger Side
Part Number: 25971087
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Mount, Engine Mounting
- Position: Passenger Side
- Replaces: 10360741, 15212625, 15880913
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.3 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Transmission Mount, Rear
Part Number: 25892303
$90.06 MSRP: $141.08
You Save: $51.02 (37%)
Product Specifications
- Other Name: Mount-Transmission Rear; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount, Transmission Mounting
- Position: Rear
- Replaces: 10376350, 15797828
- Item Weight: 7.60 Pounds
- Item Dimensions: 8.2 x 24.2 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25892303
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Motor Mount, Passenger Side
Part Number: 25971089
$26.38 MSRP: $41.32
You Save: $14.94 (37%)
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Front Mount; Mount, Engine Mount Dampening
- Position: Passenger Side
- Replaces: 10360738
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.2 x 5.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25971089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac SRX Transmission Mount, Rear
Part Number: 25892306
Product Specifications
- Other Name: Mount-Transmission Rear; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount, Transmission Mounting
- Position: Rear
- Replaces: 15797829, 15143640
- Item Weight: 7.50 Pounds
- Item Dimensions: 9.3 x 8.2 x 21.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25892306
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Mount Bracket, Passenger Side
Part Number: 10360747
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 25716470
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.1 x 5.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10360747
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2007 Cadillac SRX Mount Bracket, Passenger Side
Part Number: 10360742
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Replaces: 25756320
- Item Weight: 1.90 Pounds
- Item Dimensions: 10.1 x 8.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10360742
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2007 Cadillac SRX Mount Bracket, Driver Side
Part Number: 10360743
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Position: Driver Side
- Replaces: 25756321
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.6 x 5.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10360743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS

2007 Cadillac SRX Motor And Transmission Mount

With a comprehensive array of OEM 2007 Cadillac SRX Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Cadillac SRX Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the Motor and Transmission Mount on a 6L50/6L80/6L90 automatic transmission in an all-wheel-drive on 2007 Cadillac SRX?
A: Start by raising and supporting the vehicle when replacing the transmission mount on a 6l50/6l80/6l90 automatic transmission in all-wheel-drive vehicles. Begin by taking out the exhaust system while you support the transmission with a suitable jack along with a block of wood. You should start by detaching the transmission vent hose from its six retainers that secure the mount assembly before you can remove the transmission mount support to body mounting bolts alongside the transmission mount support to transfer case mounting bolts. Extract the transmission mount support assembly from your vehicle. Installation follows mounting the transmission support assembly by properly torquing the transmission bolts in sequence. Begin by hand-tightening the transmission mount support to transfer case mounting bolts and then fasten the right side bolt to 110 n.m (81 lb ft) followed by the left side bolt to 110 n.m (81 lb ft). After positioning the transmission mount support assembly back into position, tighten its body mounting bolts at 60 n.m (44 lb ft). Return the transmission vent hose to its six retaining points on the mount assembly while removing the transmission jack before installing the exhaust system and completing the vehicle's descent.

Related 2007 Cadillac SRX Parts

Alternate Year Models

2006 Cadillac SRX Motor And Transmission Mount 2008 Cadillac SRX Motor And Transmission Mount