Other Name: Mount-Transmission Rear; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Mount, Transmission Mounting
Position: Rear
Replaces: 15797829, 15143640
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
| Page 1 of 2 |Next >
1-20 of 26 Results
Cadillac SRX Motor And Transmission Mount
Our website offers an extensive catalog of genuine Cadillac SRX Motor And Transmission Mount at unbeatable prices. Every OEM Cadillac SRX Motor And Transmission Mount comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac SRX Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to replace the Motor and Transmission Mount on a 6L50/6L80/6L90 automatic transmission in an all-wheel-drive on Cadillac SRX?
A: You need to lift and stabilize an all-wheel-drive vehicle before beginning 6l50/6l80/6l90 automatic transmission transmission mount replacement. Next, remove the exhaust system. A suitable jack should support the transmission alongside a block of wood while users should detach the transmission vent hose from its six retainers on the mount assembly. Extract the assembly consisting of transmission mount support from your vehicle by disconnecting bolts that link it both to the body framework and Transfer Case. Position the transmission mount support assembly correctly before tightening all transmission mount bolts according to the specified order as follows: first install Transfer Case mounting bolts then torque right bolt to 110 nm (81 lb ft) and left bolt to 110 nm (81 lb ft). Begin by hand-installing the Transfer Case mounting bolts before tightening the right side bolt to 110 nm (81 lb ft) and the left side bolt to 110 nm (81 lb ft). You should install the body mounting bolts afterward and torque them to 60 nm (44 lb ft). Position the transmission vent hose into retainers while you remove the transmission jack then reinstall the exhaust system to finish the procedure by lowering the vehicle.