Make sure this part fits

GM 25762621
Mount Bracket, Passenger Side

2004-2010 GM

Customer Questions & Expert Answers (29)
GM 25762621 Mount Bracket, Passenger Side
  • Part Description
    Bracket, Engine Mounting
  • Position
    Passenger Side
  • Replaced By
    10360746
  • Manufacturer
    General Motors
Make sure this part fits
$7.81 MSRP: $12.23
You Save: $4.42 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009, 2004-2006 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25762621 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25762621 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What bolts need to be removed to take out the transmission mount support assembly for the 2009 Cadillac SRX? Posted by Customer
    A:
    The mounting bolts connecting the transmission mount support to the body and the transfer case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after tightening the upper retaining nut for the 2004 Cadillac SRX? Posted by Customer
    A:
    Lower the engine with the screw jack until it rests on the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after removing the right engine mount bracket for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after the engine is resting on the mount for the 2004 Cadillac SRX? Posted by Customer
    A:
    Install the engine mount lower retaining nut, tightening it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done if there is movement between the metal plate of the mount and its attaching points for the 2004 Cadillac SRX? Posted by Customer
    A:
    Lower the transmission/transaxle and tighten the bolts or nuts securing the mount to the frame or mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    How do you remove the left engine mount bracket for the 2005 Cadillac SRX? Posted by Customer
    A:
    Remove the left engine mount bracket retaining bolts, ensuring not to distort or bend the engine mount heat shield, and then take out the left engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed after raising for the 2009 Cadillac SRX? Posted by Customer
    A:
    The exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after removing the bolts for the 2006 Cadillac STS? Posted by Customer
    A:
    Take out the transmission mount from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be done after installing the left engine mount bracket for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install the engine mount to the vehicle and secure it with the upper engine mount retaining nut, tightening it to 80 Nm (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the engine mount bracket be installed for the 2005 Cadillac STS? Posted by Customer
    A:
    Position the engine mount bracket back onto the vehicle and install the mounting bolts, tightening them to 60 Nm (44 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What needs to be detached from the mount assembly for the 2007 Cadillac STS? Posted by Customer
    A:
    Detach the transmission vent hose from the six retainers on the mount assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after installing the top engine mount retaining nut for the 2008 Cadillac STS? Posted by Customer
    A:
    Install the left engine mount and engine mount bracket assembly, followed by the left engine mount bracket retaining bolts, which should be tightened to 60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step after tightening the upper engine mount retaining nut for the 2005 Cadillac STS? Posted by Customer
    A:
    Reinstall the right exhaust manifold and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be removed after raising the engine for the 2006 Cadillac SRX? Posted by Customer
    A:
    The upper engine mount retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after installing the upper engine mount retaining nut for the 2008 Cadillac STS? Posted by Customer
    A:
    Lower the engine using the screw jack until the weight is resting on the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after tightening the mounting bolts for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the screw jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the right engine mount (W/AWD) for the 2005 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2008 Cadillac STS? Posted by Customer
    A:
    The exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What should be removed after raising the engine for the 2009 Cadillac SRX? Posted by Customer
    A:
    The upper engine mount retaining nut and the engine mount itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should you do after inserting the block of wood for the 2005 Cadillac STS? Posted by Customer
    A:
    Raise the transmission/transaxle to remove weight from the transmission/transaxle mount, creating slight tension in the rubber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the final step after installing the engine mount for the 2006 Cadillac STS? Posted by Customer
    A:
    Reinstall the left engine mount bracket and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after positioning the engine mount for the 2007 Cadillac STS? Posted by Customer
    A:
    Install the engine mount retaining nut and tighten it to 80 N.m (59 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the transmission be supported during the replacement for the 2010 Cadillac STS? Posted by Customer
    A:
    Using a suitable jack and a block of wood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is the next step after lowering for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the nut from the top of the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done with the M 10 engine mount bracket mounting bolts for the 2007 Cadillac STS? Posted by Customer
    A:
    Install them and tighten to 60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after installing the upper engine mount retaining nut for the 2005 Cadillac SRX? Posted by Customer
    A:
    Lower the engine using the screw jack until the weight is resting on the mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after raising for the 2005 Cadillac SRX? Posted by Customer
    A:
    The exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Motor And Transmission Mount
    Q:
    What is used for support under the oil pan for the 2006 Cadillac SRX? Posted by Customer
    A:
    Install a screw jack with a block of wood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mount Bracket, Passenger Side 25762621 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25762621 Mount Bracket, Passenger Side is available in the market under the name GM Engine Mount, Motor And Transmission Mount, Engine Mount Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25762621 Mount Bracket, Passenger Side fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 25762621 maintains top performance when functioning as the Bracket, Engine Mounting unit at its Passenger Side. The component 25762621 is constructed from durable material and its dimensions span 9.4 x 8.6 x 6.8 inches while weighing 2.30 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 25762621 has available replacement options listed under 10360746. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.