Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
Position: Driver Side
Replaces: 25756321
Item Weight: 1.90 Pounds
Item Dimensions: 7.6 x 5.2 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10360743
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
Base | 6 Cyl 3.6 L GAS
2009 Cadillac SRX Motor And Transmission Mount
With a comprehensive array of OEM 2009 Cadillac SRX Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac SRX Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Cadillac SRX Parts Questions & Experts Answers
Q: How to Replace the Rear Motor and Transmission Mount on a 5L40-E/5L50-E Automatic Transmission in an AWD on 2009 Cadillac SRX?
A: The replacement process for a 5l40-e/5l50-e automatic transmission rear mount in an awd vehicle begins with vehicle elevation and support. Next, remove the exhaust system. First support the transmission with a suitable jack that has a block of wood under it. Then you should disconnect the transmission support body mounting bolts and after that disconnect the transmission support mounting bolts. The transmission mount should be removed from the vehicle. The installation requires placing the new transmission mount on the car while tightening both right side transmission mount assembly bolts to 110 nm (81 lb ft) and left side transmission mount assembly bolts to 110 nm (81 lb ft) in their recommended sequence. Fasten the transmission mount to body mounting bolts with tightening torque set at 60 nm (44 lb ft). Lower the vehicle after you reinstall the exhaust system.