How to replace the Alternator Bracket (Second Design) on Chevrolet Malibu?

The first step to replace the generator bracket (Second Design) is disconnecting the negative Battery Cable. The maintenance technician should rotate the Drive Belt tensioner counterclockwise to remove the generator device. The process starts by removing the Drive Belt tensioner bolt followed by the Drive Belt tensioner. Then comes the Drive Belt idler pulley bolt and its pulley. The next step involves removing generator bracket bolts followed by the generator bracket. Begin the installation process with the generator bracket followed by its bolts which should be tightened in order to 50 n.m (37 lb ft). The installation of the Drive Belt tensioner along with its bolt requires you to tighten it to 50 n.m (37 lb ft). Afterward install the Drive Belt idler pulley together with its bolt then tighten it to 50 n.m (37 lb ft). After reinstallation of the generator complete the installation by rotating the Drive Belt tensioner counterclockwise before reconnecting the negative Battery Cable.

How to Replace an Alternator Bracket on Chevrolet Impala?

You must disconnect the battery negative cable from the battery next to remove the generator bracket bolts and the generator before you can separate the generator bracket. You should then remove the engine lift hook. The first step for installation includes attaching the engine lift hook after which you should install the generator bracket to the engine and tighten the bracket bolts by hand. Screw in each generator bracket bolt to 50 n.m while tightening (37 lb ft) before you reattach the generator followed by reconnecting the battery negative cable to the battery.

How to replace the alternator bracket on Chevrolet S10?

The process starts by detaching the negative Battery Cable before all other components like the engine cooling fan, drive belt and engine wiring harness bracket from the generator mounting bracket, drive belt tensioner and Drive Belt idler pulley need to be taken off. The generator mounting bracket can be removed by first unfastening its 3 bolts and securing nut connecting to engine then pulling the bracket free. Attach the generator mounting bracket to the Cylinder Head while using 2 bolts and a nut before tightening them to 41 n.m (30 lb ft). The generator mounting bracket requires installation of the Drive Belt idler pulley followed by the Drive Belt tensioner and engine wiring harness bracket before securing the bracket bolt at 25 n.m (18 lb ft). The installation process ends by fitting the generator then adding the Drive Belt alongside the engine cooling fan and finally connecting the negative Battery Cable.

OEM Chevrolet Alternator Bracket

Alternator Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

126 Alternator Brackets found

View related parts
Chevrolet Rear Brace
Part Number: 14079284
$6.64 MSRP: $8.75
You Save: $2.11 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Brace, Generator Mounting; Spacer, Generator Mounting; Spacer, Generator Adjust
- Position: Rear
Fits the following Chevrolet Models:
- Astro | 1985 | Base, CL, CS | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Mount Bracket
Part Number: 12702537
$66.44 MSRP: $118.64
You Save: $52.20 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Generator Mounting
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Mount Bracket
Part Number: 24590383
$23.41 MSRP: $41.81
You Save: $18.40 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Generator; Alternator Bracket; Bracket, Generator Mounting
- Replaces: 24579930
Fits the following Chevrolet Models:
- Colorado | 2016-2022 | LT, Z71, ZR2 | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Mount Bracket, Passenger Side
Part Number: 12692945
$90.10 MSRP: $141.11
You Save: $51.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Generator Mounting; Alternator Bracket
- Position: Passenger Side
- Replaces: 12644605
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Mount Brace
Part Number: 96892600
$21.73 MSRP: $34.03
You Save: $12.30 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Generator Adjust; Pulley Brace; Brace, Generator Mounting
- Replaces: 96490467
Fits the following Chevrolet Models:
- Aveo | 2009-2011, 2004-2006 | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
- Aveo5 | 2007-2008 | LS, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Mount Bracket
Part Number: 92457058
$116.17 MSRP: $208.38
You Save: $92.21 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Generator Mounting; Alternator Bracket
Fits the following Chevrolet Models:
- Caprice | 2012-2017 | PPV | 6 Cyl 3.6 L FLEX
View related parts
Chevrolet Mount Bracket
Part Number: 12700411
$60.93 MSRP: $95.44
You Save: $34.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Generator Mounting; Alternator Bracket
- Replaces: 12694656
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Mount Bracket
Part Number: 12700902
$40.42 MSRP: $63.32
You Save: $22.90 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Cooling; Bracket, Generator Mounting
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Mount Bracket
Part Number: 12692949
$56.63 MSRP: $88.71
You Save: $32.08 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Generator & Drive Belt Tensioner; Bracket, Generator Mounting; Bracket, Engine Cooling
- Replaces: 12597648
Fits the following Chevrolet Models:
- Colorado | 2015-2016 | LT, WT, Z71 | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Alternator Bracket
Part Number: 20918520
$0.80 MSRP: $1.24
You Save: $0.44 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Emission System
- Replaced by: 22957139
Fits the following Chevrolet Models:
- Impala | 2014 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
- Malibu | 2013-2015 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Mount Bracket
Part Number: 98023014
$182.35 MSRP: $247.52
You Save: $65.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Generator; Alternator Bracket; Bracket, Generator Mounting
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2007-2010 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2007-2010 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Alternator Bracket
Part Number: 12567695
$18.37 MSRP: $28.79
You Save: $10.42 (37%)
Product Specifications
- Other Name: Bracket, Generator Mounting; Mount Bracket; Alternator Mount Bracket; Alternator Front Bracket
- Replaces: 24509020
Fits the following Chevrolet Models:
- Impala | 2000-2005 | Base | 6 Cyl 3.4 L GAS
- Lumina | 2000-2001 | Base | 6 Cyl 3.1 L GAS
- Malibu | 2004-2006 | LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
- Monte Carlo | 2000-2005 | LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
- Uplander | 2005-2006 | Base, LS, LT | 6 Cyl 3.5 L GAS
- Venture | 1999-2005 | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View More
View related parts
Chevrolet Alternator Bracket
Part Number: 14079285
Product Specifications
- Other Name: Brace, Generator Mounting; Alternator Brace; Spacer, Generator Mounting; Spacer, Generator Adjust
- Position: Rear
Fits the following Chevrolet Models:
- C10 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C20 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- C30 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
- K10 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- K20 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- K30 | 1985-1986 | Custom, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
- R10 | 1987 | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- R20 | 1987-1988 | Cheyenne, Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
- R2500 | 1989 | Silverado | 8 Cyl 5.7 L GAS
- R30 | 1987-1988 | Cheyenne, Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
View More
View related parts
Chevrolet Rear Brace
Part Number: 12556915
Product Specifications
- Other Name: Bracket, Generator Mounting
- Position: Rear
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Alternator Bracket
Part Number: 14092955
Product Specifications
- Other Name: Bracket-Generator; Bracket, Generator Mounting
Fits the following Chevrolet Models:
- S10 | 1991-1993 | Baja, Base, EL, Tahoe | 6 Cyl 2.8 L GAS
View related parts
Chevrolet Mount Bracket
Part Number: 12652395
$59.27 MSRP: $92.85
You Save: $33.58 (37%)
Product Specifications
- Other Name: Bracket, Generator Mounting; Alternator Bracket
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Alternator Brace
Part Number: 10135866
Product Specifications
- Other Name: Brace-Generator; Brace, Generator Mounting
Fits the following Chevrolet Models:
- Corvette | 1990-1995 | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Alternator Brace
Part Number: 22535361
Product Specifications
- Other Name: Brace-Generator; Brace, Generator Mounting
Fits the following Chevrolet Models:
- Beretta | 1993 | GTZ | 4 Cyl 2.3 L GAS
View related parts
Chevrolet Alternator Mount Bracket
Part Number: 10051569
Product Specifications
- Other Name: Bracket, Generator Mounting; Alternator Bracket
Fits the following Chevrolet Models:
- Lumina APV | 1990-1995 | Base, CL, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Mount Bracket
Part Number: 12570132
$103.79 MSRP: $162.59
You Save: $58.80 (37%)
Product Specifications
- Other Name: Bracket, Generator Mounting; Alternator Bracket; Bracket
- Replaces: 12558964
Fits the following Chevrolet Models:
- Avalanche 2500 | 2002-2006 | Base, LS, LT | 8 Cyl 8.1 L GAS
- Silverado 2500 HD | 2001-2006 | Base, LS, LT, WT | 8 Cyl 8.1 L GAS
- Silverado 2500 HD Classic | 2007 | LS, LT, WT | 8 Cyl 8.1 L GAS
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 8.1 L GAS
- Silverado 3500 Classic | 2007 | LS, LT, WT | 8 Cyl 8.1 L GAS
- Suburban 2500 | 2001-2006 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View More

| Page 1 of 7 |Next >

1-20 of 126 Results

Chevrolet Alternator Bracket Parts Questions & Experts Answers

Alternator Bracket
24509024
Q: How to replace the Alternator Bracket (Second Design) on Chevrolet Malibu?
A: The first step to replace the generator bracket (Second Design) is disconnecting the negative Battery Cable. The maintenance technician should rotate the Drive Belt tensioner counterclockwise to remove the generator device. The process starts by removing the Drive Belt tensioner bolt followed by the Drive Belt tensioner. Then comes the Drive Belt idler pulley bolt and its pulley. The next step involves removing generator bracket bolts followed by the generator bracket. Begin the installation process with the generator bracket followed by its bolts which should be tightened in order to 50 n.m (37 lb ft). The installation of the Drive Belt tensioner along with its bolt requires you to tighten it to 50 n.m (37 lb ft). Afterward install the Drive Belt idler pulley together with its bolt then tighten it to 50 n.m (37 lb ft). After reinstallation of the generator complete the installation by rotating the Drive Belt tensioner counterclockwise before reconnecting the negative Battery Cable.
Alternator Bracket
12567695
Q: How to Replace an Alternator Bracket on Chevrolet Impala?
A: You must disconnect the battery negative cable from the battery next to remove the generator bracket bolts and the generator before you can separate the generator bracket. You should then remove the engine lift hook. The first step for installation includes attaching the engine lift hook after which you should install the generator bracket to the engine and tighten the bracket bolts by hand. Screw in each generator bracket bolt to 50 n.m while tightening (37 lb ft) before you reattach the generator followed by reconnecting the battery negative cable to the battery.
Idler Pulley
10236997
Q: How to replace the alternator bracket on Chevrolet S10?
A: The process starts by detaching the negative Battery Cable before all other components like the engine cooling fan, drive belt and engine wiring harness bracket from the generator mounting bracket, drive belt tensioner and Drive Belt idler pulley need to be taken off. The generator mounting bracket can be removed by first unfastening its 3 bolts and securing nut connecting to engine then pulling the bracket free. Attach the generator mounting bracket to the Cylinder Head while using 2 bolts and a nut before tightening them to 41 n.m (30 lb ft). The generator mounting bracket requires installation of the Drive Belt idler pulley followed by the Drive Belt tensioner and engine wiring harness bracket before securing the bracket bolt at 25 n.m (18 lb ft). The installation process ends by fitting the generator then adding the Drive Belt alongside the engine cooling fan and finally connecting the negative Battery Cable.