How to replace the vacuum brake booster on Chevrolet Camaro?

Start your Brake Booster replacement by removing the components such as the hood rear seal, left side air inlet screen, Brake Booster vacuum hose and clamp from the check valve. Take the master cylinder off its Brake Booster position before taking out the left side i/p insulator. Loosen the Brake Pedal nuts to remove the Brake Booster attachment points with bracket and the Brake Pedal. When replacing the clutch you should loosen the clutch master cylinder nuts. Leese the Brake Booster pushrod from the Brake Pedal lever pin while you remove its pushrod retainer and washer from within the car. Then tilt the Brake Booster gently to disconnect the pushrod without applying excessive side pressure. Take off the power Brake Booster unit from the vehicle. Install the power Brake Booster by aligning it with the vehicle base. As needed, tip the unit to connect the Brake Booster pushrod smoothly to Brake Pedal lever pin. Wear gloves to slide in the brake pushrod washer and retainer on their respective engine-side locations. Install the Brake Booster bottom nuts into the Brake Pedal bracket at 20 nm (15ft.lbs). Fasten them in this precise order: inboard upper, outboard lower, outboard upper, and inboard lower. For cars with manual transmission you should tighten the clutch master cylinder nuts to 20 ft. Lbs at 27 nm. Screw the master cylinder into place on the Brake Booster and fasten it using the master cylinder nuts. Tighten them to a torque setting of 29 nm (21 ft. Lbs.). Reach the vacuum hose back to its position at the check valve before installing the left insulator, air inlet filter, and hood seal. Finally, bleed the brakes.

OEM Chevrolet Camaro Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Boosters found

View related parts
Chevrolet Camaro Brake Booster Part Number: 84614711
$95.00 MSRP: $184.38
You Save: $89.38 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Booster Assembly
- Replaced by: 85520935
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Brake Booster Part Number: 84614710
$130.40 MSRP: $236.02
You Save: $105.62 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Booster Assembly
- Replaced by: 85520931
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Brake Booster Part Number: 23422812
$142.54 MSRP: $279.08
You Save: $136.54 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Vacuum Power Brake; Power Booster; Booster Assembly
- Replaces: 92234618
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Brake Booster Part Number: 23422896
Product Specifications
- Other Name: Booster, Vacuum Power Brake; Power Booster
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | Z/28 | 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Brake Booster Part Number: 18060082
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1992 Chevrolet Camaro | Base, LT, RS, RS Heritage Edition, Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Camaro Brake Booster Part Number: 18060046
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster
- Replaces: 18010911
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Brake Booster Part Number: 18029982
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
- Replaces: 18020555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Brake Booster

Want to cut long-term maintenance and repair costs? Choose OEM Brake Booster. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Brake Booster includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Camaro Brake Booster is one of the vital parts that improve the braking mechanism since it decreases the level of force required to engage the brake. Through the employment of a vacuum chamber, the brake booster exaggerates the amount of force that the driver is able to apply which makes the braking easier and faster. This device is very vital in making sure that the braking of Camaro vehicles is well done and adjustable in case one needs to slow down or stop the car. It is relevant to explain that the brake booster cannot operate without the running of the engine, as it works under vacuum pressure to enhance the force which is applied to the brake pedal.

Chevrolet Camaro Brake Booster Parts and Q&A

Brake Booster
18029982
Q: How to replace the vacuum brake booster on Chevrolet Camaro?
A:
Start your Brake Booster replacement by removing the components such as the hood rear seal, left side air inlet screen, Brake Booster Vacuum Hose and clamp from the check valve. Take the master cylinder off its Brake Booster position before taking out the left side i/p insulator. Loosen the Brake Pedal nuts to remove the Brake Booster attachment points with bracket and the Brake Pedal. When replacing the clutch you should loosen the clutch master cylinder nuts. Leese the Brake Booster pushrod from the Brake Pedal lever pin while you remove its pushrod retainer and washer from within the car. Then tilt the Brake Booster gently to disconnect the pushrod without applying excessive side pressure. Take off the power Brake Booster unit from the vehicle. Install the power Brake Booster by aligning it with the vehicle base. As needed, tip the unit to connect the Brake Booster pushrod smoothly to Brake Pedal lever pin. Wear gloves to slide in the brake pushrod washer and retainer on their respective engine-side locations. Install the Brake Booster bottom nuts into the Brake Pedal bracket at 20 nm (15ft.lbs). Fasten them in this precise order: inboard upper, outboard lower, outboard upper, and inboard lower. For cars with manual transmission you should tighten the clutch master cylinder nuts to 20 ft. Lbs at 27 nm. Screw the master cylinder into place on the Brake Booster and fasten it using the master cylinder nuts. Tighten them to a torque setting of 29 nm (21 ft. Lbs.). Reach the vacuum hose back to its position at the check valve before installing the left insulator, air inlet filter, and hood seal. Finally, bleed the brakes.