OEM Chevrolet Classic Door Lock Cylinder

Chevrolet Classic Door Lock Cylinder Parts and Q&A

• Lock Cylinder, Front
  15822402
  Q: How to replace the outside Door Lock Cylinder on Chevrolet Classic?

  A:

  A process to change the outside handle and lock cylinder begins with raising the window to maximum height before removing the front door trim panel and front door water deflector. Start the replacement of the outside handle rod by detaching it from the Door Lock Actuator while you also separate the Door Lock Cylinder rod from the front Door Lock Cylinder. The next procedure requires removal of the door outside handle bolts prior to the door outside handle and then extraction of the door inside locking rod from the door outside handle. The first step should be to disconnect the Door Lock Cylinder retaining clip followed by removing the Door Lock Cylinder gasket . Begin installation by placing the Door Lock Cylinder gasket first. After that move to install the Door Lock Cylinder by using its retaining clip. The installation process requires one to reattach the door inside locking rod to the door outside handle and to install both the door outside handle and its bolts. The door outside handle requires positioning in closed mode with the lower end of the rod entering the retainer located on the Door Lock Actuator to activate the retainer mechanism. The last step includes connecting the Door Lock Cylinder rod to the front Door Lock Cylinder before reinstalling the front door water deflector.