How to replace the throttle body assembly on Chevrolet Monte Carlo?

A replacement of the Throttle Body assembly requires draining the cooling system first. Remove the air cleaner intake duct while disconnecting two components: the idle air control (IAC) valve electrical connector and the throttle position (TP) sensor electrical connector. Begin by disassembling the Throttle Body assembly through removal of the accelerator controls cable bracket followed by the Throttle Body inlet and outlet hoses. Start by removing the heater pipe nut at the Throttle Body before using a wrench to remove the assembly with Throttle Body Gasket and securing bolts and nuts. The gasket mating surfaces require inspection after cleaning with caution to avoid any solvent use and strict avoidance of sharp tools that could harm the surfaces. Installation requires new gasket replacement followed by Throttle Body assembly mounting through nut and bolt tightening to 28 n.m (21 lb ft). Next install the inlet and outlet hoses before screwing in and tightening the heater pipe nut to 25 n.m (18 lb ft). The next steps include attachment of tp sensor and iac valve electrical connectors followed by bracket install for the accelerator controls and air cleaner intake duct. Fill the cooling system afterward.

OEM Chevrolet Monte Carlo Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Throttle Bodies found

View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 12568580
$332.47 MSRP: $675.28
You Save: $342.81 (51%)
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter; Electronic Throttle Body Assembly; Fuel Injection Throttle Body
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 12609500
$241.96 MSRP: $491.44
You Save: $249.48 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Body, Fuel Injection Air Meter; Electronic Throttle Body Assembly; Fuel Injection Throttle Body.
- Replaces: 12577029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 24507235
$434.28 MSRP: $786.02
You Save: $351.74 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Throttle Body Kit; Body, Fuel Injection Air Meter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 12595271
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 17113630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 17111758
Product Specifications
- Other Name: TBI
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Fuel Pressure Regulator Part Number: 17078262
Product Specifications
- Other Name: Body, Throttle Body/Carburetor; Fuel Meter; Body Kit; Metering Assembly; Throttle Body/Carburetor.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 24507241
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 24503396
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LT, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 24507230
Product Specifications
- Other Name: Throttle Body Kit; Body, Fuel Injection Air Meter
- Replaces: 24502190, 24503390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 24507227
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 24507237
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 17113576
Product Specifications
- Other Name: Body, Fuel Injection Air Meter; Throttle Body Kit
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 17096152
Product Specifications
- Other Name: Body, Fuel Injection Air Meter; Throttle Body Kit; Body Kit, Throttle Body/Carburetor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Kit Part Number: 17096139
Product Specifications
- Other Name: Body-Trot; Body, Fuel Injection Air Meter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Throttle Body Part Number: 17094010
Product Specifications
- Other Name: Throttle Body Kit; Body Kit, Throttle Body/Carburetor
- Replaces: 17113118
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS

Chevrolet Monte Carlo Throttle Body

Want to cut long-term maintenance and repair costs? Choose OEM Throttle Body. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Throttle Body includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

This component found in Chevrolet Monte Carlo automobiles, known as Throttle Body operates by controlling the amount of air to be let into the engine in accordance with the accelerator pedal. Located between the air cleaner and the intake manifold, it has a butterfly valve, which fluctuates to control the amount of air to be taken into the engine heads. In older models, the car used Throttle Body Injection or TBI and in the contemporary cars, multi-port fuel injection is used. ETC has become the de facto standard as for the most part, it eliminated mechanical linkage and provided better interaction with safety systems. Cleaning and replacement of different components are also required often for proper working and to increase the appliance's life span.

Chevrolet Monte Carlo Throttle Body Parts Questions & Experts Answers

Throttle Body
12595271
Q: How to replace the throttle body assembly on Chevrolet Monte Carlo?
A:
A replacement of the Throttle Body assembly requires draining the cooling system first. Remove the air cleaner intake duct while disconnecting two components: the idle air control (IAC) valve electrical connector and the throttle position (TP) sensor electrical connector. Begin by disassembling the Throttle Body assembly through removal of the accelerator controls cable bracket followed by the Throttle Body inlet and outlet hoses. Start by removing the heater pipe nut at the Throttle Body before using a wrench to remove the assembly with Throttle Body Gasket and securing bolts and nuts. The gasket mating surfaces require inspection after cleaning with caution to avoid any solvent use and strict avoidance of sharp tools that could harm the surfaces. Installation requires new gasket replacement followed by Throttle Body assembly mounting through nut and bolt tightening to 28 n.m (21 lb ft). Next install the inlet and outlet hoses before screwing in and tightening the heater pipe nut to 25 n.m (18 lb ft). The next steps include attachment of tp sensor and iac valve electrical connectors followed by bracket install for the accelerator controls and air cleaner intake duct. Fill the cooling system afterward.