OEM Chevrolet SSR Brake Booster

Chevrolet SSR Brake Booster Parts Questions & Experts Answers

• Brake Booster
  15247618
  Q: How to replace the vacuum brake booster on Chevrolet SSR?

  A: The first thing to do to replace the vacuum Brake Booster is to apply the parking brake and get rid of the master cylinder. Remove the vacuum hose from both the vacuum booster and the engine, and afterwards, take off the trim hinge pillar panel. After that, detach the Pushrod retainer from the brake pedal pin , remove the stop lamp switch , and take off the Pushrod as well. Take out the nuts securing the vacuum booster, along with the whole vacuum booster assembly and its gasket. When putting it back together, put the gasket and vacuum booster in place and fasten the mounting nuts, ensuring you torque them to 40 nm (30 ft. Lbs.). Position the stop lamp switch on the Pushrod and put it onto the brake pedal pin, then attach the Pushrod retainer onto the brake pedal pin . Put back the trim hinge pillar panel, hook up the vacuum hose to the vacuum booster and the engine, and put the master cylinder in place.