How to replace the vacuum brake booster on 2004 Chevrolet SSR?

The Vacuum Brake Booster should be replaced with these steps: First, press the parking brake and then take out the master cylinder. Disengage the vacuum hose, pull off the trim hinge pillar panel, and pull off the pushrod retainer. Take out the vacuum booster assembly and gasket. To install, put the gasket and vacuum booster, tighten the mounting nuts, and re-install.

OEM 2004 Chevrolet SSR Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2004 Chevrolet SSR Brake Booster Part Number: 15247618
Product Specifications
- Other Name: Booster, Power Brake; Booster Assembly; Booster; Booster, Hydraulic Power Brake Booster
- Replaces: 18044444, 18047694
- Item Weight: 11.60 Pounds
- Item Dimensions: 11.5 x 16.2 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15247618
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2004 Chevrolet SSR Brake Booster

With a comprehensive array of OEM 2004 Chevrolet SSR Brake Booster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet SSR Brake Booster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet SSR Brake Booster Parts and Q&A

Q: How to replace the vacuum brake booster on 2004 Chevrolet SSR?
A: The Vacuum Brake Booster should be replaced with these steps: First, press the parking brake and then take out the master cylinder. Disengage the vacuum hose, pull off the trim hinge pillar panel, and pull off the pushrod retainer. Take out the vacuum booster assembly and gasket. To install, put the gasket and vacuum booster, tighten the mounting nuts, and re-install.