How to replace the engine mount on Chevrolet Uplander?

The first step to replace the Engine Mount consists of removing the air cleaner outlet duct. The first step should be removing Engine Mount struts from both left and right sides. Prop the vehicle and eliminate the Catalytic Converter before continuing. The procedure continues by detaching the right front wheel along with its tire before removing the right engine splash shield. First use a block of wood between the Oil Pan and the jack support to protect from damage while removing the Engine Mount to frame nuts. A utility stand and block of wood should support the Oil Pan during engine elevation before you remove both the Engine Mount bracket to Oil Pan bolts and the Engine Mount and bracket from the assembly. Detach the Engine Mount bracket of the Engine Mount. Begin by fitting the Engine Mount onto the bracket before you fasten the Engine Mount bracket to Engine Mount nuts then tighten them to 50 n.m (37 lb ft). After securing the Engine Mount to the Oil Pan install the Engine Mount bracket to Oil Pan bolts while tightening them to 58 n.m (43 lb ft). First lower the engine with the utility stand and then fasten the Engine Mount to the frame nuts while tightening them to 47 n.m (35 lb ft). Place back the right engine splash shield together with the right front wheel along with tire and Catalytic Converter before lowering the vehicle. The procedure ends with reinstallation of Engine Mount struts along with the air cleaner outlet duct.

OEM Chevrolet Uplander Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Engine Mounts found

View related parts
Chevrolet Uplander Strut Part Number: 10345905
$79.45 MSRP: $135.26
You Save: $55.81 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Mount Bracket Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Strut Bracket, Passenger Side Part Number: 12577766
$24.60 MSRP: $40.55
You Save: $15.95 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Rear Bracket; Bracket, A/C Compressor Mounting
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Strut Bracket Part Number: 10274661
$177.35 MSRP: $301.93
You Save: $124.58 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Front Bracket; Engine Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Motor Mount Part Number: 10448575
$69.62 MSRP: $118.53
You Save: $48.91 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Mount Bracket, Passenger Side Part Number: 12570317
$18.16 MSRP: $59.40
You Save: $41.24 (70%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Rear Bracket; Bracket, A/C Compressor Mounting
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
Chevrolet Uplander Strut Part Number: 10247084
$37.86 MSRP: $91.28
You Save: $53.42 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Mount Bracket Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Lower Bracket Part Number: 10325272
Product Specifications
- Other Name: Bracket, Engine Mounting; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS

Chevrolet Uplander Engine Mount

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Uplander parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Uplander Engine Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Uplander Engine Mount is a bit difficult to define but it plays an essential role for the minivan that was manufactured by Chevrolet between 2005 and 2009. This Engine Mount acts as a sound and vibration isolator and keeps the engine and transaxle in place within the vehicle chassis. This positioning is requisite for safe operation of the vehicle and assists in avoiding wear and tear of other parts. Instead, the Chevrolet Uplander can work with other models; this type of motor mount features metal pieces attached to rubber isolators, hydraulic ones, and even electronic "active" ones that can change the stiffness depending on the engine's revolutions. These features improve both comfort and durability of the car, that is why Chevrolet Uplander Engine Mount differs from other automobiles in the given market. The Engine Mount should be checked often as its irregularity can result to sponginess or separation. Powerful V6 engines and a 4-speed automatic transmission produce commendable fuel efficiency with additional effectiveness of the Engine Mount. In conclusion, the Chevrolet Uplander Engine Mount is very useful and important since it improves on the vehicle's performance and reliability, thus making it suitable for family use as a minivan.

Chevrolet Uplander Engine Mount Parts Questions & Experts Answers

Strut Bracket
10274661
Q: How to replace the engine mount on Chevrolet Uplander?
A:
The first step to replace the Engine Mount consists of removing the air cleaner outlet duct. The first step should be removing Engine Mount struts from both left and right sides. Prop the vehicle and eliminate the Catalytic Converter before continuing. The procedure continues by detaching the right front wheel along with its tire before removing the right engine splash shield. First use a block of wood between the Oil Pan and the jack support to protect from damage while removing the Engine Mount to frame nuts. A utility stand and block of wood should support the Oil Pan during engine elevation before you remove both the Engine Mount bracket to Oil Pan bolts and the Engine Mount and bracket from the assembly. Detach the Engine Mount bracket of the Engine Mount. Begin by fitting the Engine Mount onto the bracket before you fasten the Engine Mount bracket to Engine Mount nuts then tighten them to 50 n.m (37 lb ft). After securing the Engine Mount to the Oil Pan install the Engine Mount bracket to Oil Pan bolts while tightening them to 58 n.m (43 lb ft). First lower the engine with the utility stand and then fasten the Engine Mount to the frame nuts while tightening them to 47 n.m (35 lb ft). Place back the right engine splash shield together with the right front wheel along with tire and Catalytic Converter before lowering the vehicle. The procedure ends with reinstallation of Engine Mount struts along with the air cleaner outlet duct.