How to replace the Spark Plug Wires on Chevrolet Uplander?

To replace the Spark Plug wires, it is necessary to remove the intake manifold cover. Remove the left side Spark Plug wires from the spark plugs, as well as the spark coil. In case of replacement of one plug wire, open the retaining clips, remove the Spark Plug wire. Next, remove left clips of side Spark Plug wires from intake manifold bracket and heater inlet and outlet pipe, and then remove the Spark Plug wire assembly. Turn the engine to gain access at the back, then remove the left side Spark Plug wires from their respective sparks and right side the sparks plug wires from the spark coil. With only one plug wire to be replaced, open the retaining clips and remove it, remove the right side Spark Plug wire clip from the spark coil bracket and remove the Spark Plug wire assembly. During installation also install Spark Plug wire assembly then fasten right side Spark Plug wire clip on the spark coil bracket. Replace the plug wire that was replaced somehow and lock up the retaining clip. Connect the right-end Spark Plug wire to the spark coil and right-end spark plugs. Turn the engine to its original position, then place the Spark Plug wire assembly. The left side Spark Plug wire clips go on the intake manifold bracket, heat inlet and outlet pipe. If one plug wire is replaced, put it in and close the retaining clip. Link up the left Spark Plug wires to the spark coil and the spark plugs, and lastly, put the intake manifold cover.

OEM Chevrolet Uplander Spark Plug Wires

Spark Plug Ignition Wires

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Spark Plug Wires found

View related parts
Chevrolet Uplander Cable Set Part Number: 89017320
$62.73 MSRP: $195.74
You Save: $133.01 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
Chevrolet Uplander Cable Set Part Number: 19417611
$97.21 MSRP: $212.24
You Save: $115.03 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wire Kit, Spark Plug; Spark Plug Wire; Plug Wire Set; Wire Kit, Spark Or Glow Plug Ignition
- Replaces: 89017743, 19351586
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Chevrolet Uplander Spark Plug Wires

Want to cut long-term maintenance and repair costs? Choose OEM Spark Plug Wires. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Uplander parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Uplander Spark Plug Wires includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Uplander Spark Plug Wires are parts that dramatically improve the dependability and drivability of the Chevrolet Uplander minivan that was manufactured between 2005 and 2009. These Spark Plug Wires are well developed so that they are capable to transfer high voltage from the ignition coil to the spark plugs, so as to make an effective and efficient ignition. What is more, the spark plug wires in the Chevrolet Uplander models are cut to size and have heavy-duty metal ends for positive connection and lower misfire. The employment of high quality insulation of greater thickness thereby making it flexible and the incorporation of brass terminals provide a reliable solution against corrosion which when added assists in determining the lifespan of the Uplander's ignition systems. These Spark Plug Wires are fulfilled precisely to fine-tune the ignition process, therefore, transforming the Chevrolet Uplander into a lot more fuel-efficient and safe automobile option to buy for families or individuals. Also, the fabulous model of the Uplander has upgraded features of independent suspensions and anti-roll bars as well as the spark plug wires for better handling and balancing,Chevrolet Uplander Spark Plug Wires can be considered in the automotive market because of their quality performance and reliability were considered to be ideal in enhancing the performance of the Uplander thus helping in ensuring safety. These spark plug wires are also designed to fit in various models of uplander and are therefore a prove of Chevrolet's stand of quality and innovation in engineering.

Chevrolet Uplander Spark Plug Wires Parts Questions & Experts Answers

Cable Set
19417611
Q: How to replace the Spark Plug Wires on Chevrolet Uplander?
A:
To replace the Spark Plug wires, it is necessary to remove the intake manifold cover. Remove the left side Spark Plug wires from the spark plugs, as well as the spark coil. In case of replacement of one plug wire, open the retaining clips, remove the Spark Plug wire. Next, remove left clips of side Spark Plug wires from intake manifold bracket and heater inlet and outlet pipe, and then remove the Spark Plug wire assembly. Turn the engine to gain access at the back, then remove the left side Spark Plug wires from their respective sparks and right side the sparks plug wires from the spark coil. With only one plug wire to be replaced, open the retaining clips and remove it, remove the right side Spark Plug wire clip from the spark coil bracket and remove the Spark Plug wire assembly. During installation also install Spark Plug wire assembly then fasten right side Spark Plug wire clip on the spark coil bracket. Replace the plug wire that was replaced somehow and lock up the retaining clip. Connect the right-end Spark Plug wire to the spark coil and right-end spark plugs. Turn the engine to its original position, then place the Spark Plug wire assembly. The left side Spark Plug wire clips go on the intake manifold bracket, heat inlet and outlet pipe. If one plug wire is replaced, put it in and close the retaining clip. Link up the left Spark Plug wires to the spark coil and the spark plugs, and lastly, put the intake manifold cover.