How to replace the engine flywheel (MA5) on GMC Canyon?

Engine replacement of the Flywheel (MA5) begins when you extract the clutch assembly followed by removing its bolts which you must discard before continuing. The next task should be Flywheel removal followed by its cleaning and thorough inspection. Follow installation steps by positioning the new Flywheel onto the Crankshaft yet work according to the fastener notice to set the new Flywheel bolts. Utilize the angle meter (J 45059) for Flywheel bolt rotation after securing them with a torque of 25 nm (18 ft. Lbs.) before reassembly of the clutch component.

How to replace the Flywheel in an automatic transmission on GMC Yukon?

Begin the automatic transmission flex plate replacement by removing the transmission while recording the engine Flywheel position and direction before extracting it. Begin by removing both the Flywheel bolts before taking out the Flywheel itself. Two m11x1.5 mm bolts should be installed into threaded holes of the spacer before you rotate them clockwise to extract the spacer from the Crankshaft end. To install the spacer you should fit it on the Crankshaft rear section while utilizing extended Flywheel bolts if the spacer exists. Install the Crankshaft-mounted Flywheel along with its bolts while applying threadlocking substance according to the correct part specifications. The technician should carry out three separate pass sequences to tighten Flywheel bolts: starting with 20 n.m (15 lb ft), then moving to 50 n.m (37 lb ft), and finally reaching 100 n.m (74 lb ft). Finally, reinstall the automatic transmission.

How to replace the engine flywheel on GMC Sierra 1500?

An engine installation process starts with transmission removal followed by recording both the engine Flywheel positioning and its direction before extraction. Pull out both Flywheel bolts followed by the removal of the Flywheel. The spacer should be taken out of the Crankshaft's rear by applying clockwise torque to two m11 x 1.5 mm bolts installed into threaded spacer holes. Begin installation by setting the spacer on the Crankshaft rear before installing the Flywheel and Crankshaft bolts while using longer bolts if a spacer exists. Treat the Flywheel bolt threads with threadlock gm p/n 12345382 (Canadian P/N 10953489) or an equivalent solution. The sequence for tight Flywheel bolt adjustment includes initial torque to 20 nm (15 ft. Lbs.) followed by 50 nm (37 ft. Lbs.) then final tightening to 100 nm (74 ft. Lbs.). Reassembly of the transmission becomes possible after following this process.

OEM GMC Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

77 Flywheels found

View related parts
GMC Flywheel
Part Number: 12641640
$88.03 MSRP: $137.92
You Save: $49.89 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Replaces: 12623798
Fits the following GMC Models:
- Sierra 2500 HD | 2015-2016 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2015-2016 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Flywheel
Part Number: 24238864
$553.88 MSRP: $875.06
You Save: $321.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Replaces: 24232434, 12582861
Fits the following GMC Models:
- Sierra 2500 HD | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2001-2005 | Base, SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Flywheel
Part Number: 24272406
$398.62 MSRP: $684.62
You Save: $286.00 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- Canyon | 2015-2019 | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Drive Plate
Part Number: 12621644
$225.27 MSRP: $386.89
You Save: $161.62 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate-Automatic Transmission Flexible; Plate, Engine Crankshaft
- Replaces: 97225899, 97365036, 12617798, 98025613
Fits the following GMC Models:
- Savana 2500 | 2010-2016
- Savana 3500 | 2010-2016
- Sierra 2500 HD | 2007-2023 | AT4, Base, Denali, Pro, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Sierra 3500 HD | 2007-2023 | AT4, Base, Denali, Pro, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View More
View related parts
GMC Drive Plate
Part Number: 12561217
$378.22 MSRP: $595.10
You Save: $216.88 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- Savana 3500 | 2001-2002 | Base, SLT | 8 Cyl 8.1 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2001-2006 | SLE, SLT | 8 Cyl 8.1 L GAS
View More
View related parts
GMC Drive Plate
Part Number: 12621399
$84.92 MSRP: $145.86
You Save: $60.94 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 19260102
Fits the following GMC Models:
- Sierra 1500 | 2001-2006 | Base, C3, Denali, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 1500 Classic | 2007 | Denali, SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS
- Yukon | 2001-2006 | Denali | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Drive Plate
Part Number: 12699085
$53.09 MSRP: $83.15
You Save: $30.06 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
- Replaces: 12680545, 12648842
Fits the following GMC Models:
- Acadia | 2020-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.6 L GAS
- Canyon | 2017-2022 | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Drive Plate
Part Number: 12686889
$55.19 MSRP: $86.45
You Save: $31.26 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
- Replaces: 12664938, 12630998
Fits the following GMC Models:
- Canyon | 2015-2022 | Base, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Drive Plate
Part Number: 55490601
$37.79 MSRP: $59.17
You Save: $21.38 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following GMC Models:
- Sierra 1500 | 2020-2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Sierra 1500 Limited | 2022 | AT4, Denali, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon | 2021-2023 | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon XL | 2021-2023 | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
View More
View related parts
GMC Drive Plate
Part Number: 24575991
$190.11 MSRP: $299.12
You Save: $109.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- Sonoma | 1994-2003 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS
View related parts
GMC Drive Plate
Part Number: 24586265
$93.70 MSRP: $146.73
You Save: $53.03 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
- Replaces: 12625746, 24585117, 55486218
Fits the following GMC Models:
- Canyon | 2016-2022 | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
- Savana 2500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
- Savana 3500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View More
View related parts
GMC Flywheel
Part Number: 12557585
$421.38 MSRP: $605.96
You Save: $184.58 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- Sierra 1500 | 1999-2006 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
- Sierra 1500 Classic | 2007 | SL, WT | 6 Cyl 4.3 L GAS
View related parts
GMC Flywheel
Part Number: 12582964
$203.33 MSRP: $319.80
You Save: $116.47 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2001-2006 | SLE, SLT | 8 Cyl 8.1 L GAS
View More
View related parts
GMC Drive Plate
Part Number: 14077157
$159.90 MSRP: $251.60
You Save: $91.70 (37%)
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- C1500 | 1988-1997, 1984-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1995-1999, 1984-1986 | Base, High Sierra, Sierra Classic, SLE, SLT | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C2500 | 1988-2000, 1984-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1994-1999, 1984-1986 | Base, High Sierra, Sierra Classic, SLE, SLT | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- C3500 | 1988-2000, 1984-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- G2500 | 1992-1993, 1984-1990 | Rally, Rally Custom, Rally STX, Vandura | 8 Cyl 6.2 L DIESEL
- G3500 | 1992-1993, 1984-1990 | Magnavan, Rally, Rally Camper Special, Rally Custom, Rally STX, Vandura, Vandura Special | 8 Cyl 6.2 L DIESEL
- Jimmy | 1984-1990 | Base, High Sierra, Sierra Classic | 8 Cyl 6.2 L DIESEL
- K1500 | 1988-1998, 1984-1986 | Base, High Sierra, Sierra, Sierra Classic, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1995-1999, 1984-1986 | Base, High Sierra, Sierra Classic, SLE, SLT | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Drive Plate
Part Number: 55491928
$51.98 MSRP: $81.42
You Save: $29.44 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following GMC Models:
- Terrain | 2018-2019 | SLE, SLT | 4 Cyl 1.6 L DIESEL
View related parts
GMC Drive Plate
Part Number: 12638610
$52.49 MSRP: $82.23
You Save: $29.74 (37%)
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Crankshaft
Fits the following GMC Models:
- Terrain | 2018-2023 | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Flywheel
Part Number: 12645695
$97.24 MSRP: $152.31
You Save: $55.07 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- Sierra 2500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2017-2019 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Flywheel
Part Number: 24231125
$444.13 MSRP: $701.67
You Save: $257.54 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- Sierra 2500 HD | 2006 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2006 | SL, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Drive Plate
Part Number: 10044373
$140.85 MSRP: $221.62
You Save: $80.77 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
Fits the following GMC Models:
- S15 | 1985-1990 | Base, EL, Gypsy, High Sierra, Sierra Classic | 4 Cyl 2.5 L GAS
- S15 Jimmy | 1985-1988 | Base, Gypsy, High Sierra, Sierra Classic, Timberline | 4 Cyl 2.5 L GAS
- Sonoma | 1991-1993 | Base, SLE, SLS | 4 Cyl 2.5 L GAS
View More
View related parts
GMC Flywheel
Part Number: 15705364
$545.45 MSRP: $819.00
You Save: $273.55 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel, Engine Crankshaft
- Replaces: 15967783, 15986800
Fits the following GMC Models:
- C1500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1995 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C2500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1994-1995 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C3500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 6.5 L DIESEL
- K1500 | 1994-1995 | Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1995 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K2500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 6.5 L DIESEL
- K2500 Suburban | 1994-1995 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- K3500 | 1992-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 6.5 L DIESEL
View More

| Page 1 of 4 |Next >

1-20 of 77 Results

GMC Flywheel Parts Questions & Experts Answers

Drive Plate
24100345
Q: How to replace the engine flywheel (MA5) on GMC Canyon?
A: Engine replacement of the Flywheel (MA5) begins when you extract the clutch assembly followed by removing its bolts which you must discard before continuing. The next task should be Flywheel removal followed by its cleaning and thorough inspection. Follow installation steps by positioning the new Flywheel onto the Crankshaft yet work according to the fastener notice to set the new Flywheel bolts. Utilize the angle meter (J 45059) for Flywheel bolt rotation after securing them with a torque of 25 nm (18 ft. Lbs.) before reassembly of the clutch component.
Drive Plate
12654640
Q: How to replace the Flywheel in an automatic transmission on GMC Yukon?
A: Begin the automatic transmission flex plate replacement by removing the transmission while recording the engine Flywheel position and direction before extracting it. Begin by removing both the Flywheel bolts before taking out the Flywheel itself. Two m11x1.5 mm bolts should be installed into threaded holes of the spacer before you rotate them clockwise to extract the spacer from the Crankshaft end. To install the spacer you should fit it on the Crankshaft rear section while utilizing extended Flywheel bolts if the spacer exists. Install the Crankshaft-mounted Flywheel along with its bolts while applying threadlocking substance according to the correct part specifications. The technician should carry out three separate pass sequences to tighten Flywheel bolts: starting with 20 n.m (15 lb ft), then moving to 50 n.m (37 lb ft), and finally reaching 100 n.m (74 lb ft). Finally, reinstall the automatic transmission.
Drive Plate
12555640
Q: How to replace the engine flywheel on GMC Sierra 1500?
A: An engine installation process starts with transmission removal followed by recording both the engine Flywheel positioning and its direction before extraction. Pull out both Flywheel bolts followed by the removal of the Flywheel. The spacer should be taken out of the Crankshaft's rear by applying clockwise torque to two m11 x 1.5 mm bolts installed into threaded spacer holes. Begin installation by setting the spacer on the Crankshaft rear before installing the Flywheel and Crankshaft bolts while using longer bolts if a spacer exists. Treat the Flywheel bolt threads with threadlock gm p/n 12345382 (Canadian P/N 10953489) or an equivalent solution. The sequence for tight Flywheel bolt adjustment includes initial torque to 20 nm (15 ft. Lbs.) followed by 50 nm (37 ft. Lbs.) then final tightening to 100 nm (74 ft. Lbs.). Reassembly of the transmission becomes possible after following this process.