Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
Replaces: 15941998, 19168426
Fits the following GMC Models:
Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 2500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Q: How to Service and Repair the Fuel Level Sensor on GMC Canyon?
A: The first step to change the Fuel Level Sensor involves removing the fuel tank module. Before proceeding to the replacement you must first disconnect the electrical connector of the fuel level sensor from the module cover. The installation starts with a downward movement of the fuel level sensor from the module bucket. Insert the fuel level sensor into position through the module bucket by matching its edges with the slots while making sure that the locking tab becomes totally engaged. You should connect the fuel level sensor electrical connector to the module cover before installing the fuel tank module.
Q: How to Replace a Fuel Level Sensor on GMC Sierra 1500?
A: You should begin sensor replacement by taking out the sending unit followed by disconnecting the fuel pump electrical connector. Unfasten the retaining clip attached to the fuel lever sensor electrical connector and then disconnect the fuel level sensor electrical connector. Next attach the retaining clip and extract the fuel level sensor itself after that step. Begin the installation of the fuel level sensor by inserting it first before using the retaining clip for attachment. Connect the fuel level sensor electrical connector followed by installation of the retaining clip for the fuel lever sensor electrical connector. Complete the procedure by installing the sending unit followed by reconnected fuel pump electrical connector.
Q: How to replace the fuel level sensor for the 2500 with a 43.5L (11.5 Gal) tank on GMC Yukon?
A: Start the replacement of the fuel level sensor for a 2500 equipped with a 43.5L (11.5 Gal) tank at the rear by performing fuel tank module removal. Disconnect the fuel level sensor electrical connector under the module cover before releasing the retaining clip to slide the level sensor down off the bucket. The installation process requires sliding the fuel level sensor up the bucket while allowing it to enter the retaining tab followed by reconnecting the fuel level sensor electrical connector below the module cover then installing the fuel tank module.