How to replace the Crankshaft Position Sensor on GMC Canyon?

Initially raise the vehicle for support before you begin Crankshaft Position Sensor replacement. Remove the power connector of the engine harness from the OBD II connector of the crankshaft position sensor. Then unscrew the bolt holding the sensor inside the engine block and extract the sensor from its position. Discard both O-ring seals. New O-ring seals require installation on the CKP sensor before applying a light layer of clean engine oil for lubrication. Install the CKP sensor into its block position before you apply GM P/N 12346004 (Canadian P/N 10953480) sealer to the threads of the sensor bolt. Remember to follow fastener safety instructions. Use 10 Nm (89 lb in) torque when installing the CKP sensor bolt. Begin by reconnecting the engine wiring harness electrical connector to the CKP sensor then lower the vehicle for crankshaft (CKP) system variation learn.

How to Properly Remove and Install a Crankshaft Position Sensor on GMC Acadia?

The first step toward crankshaft position sensor replacement involves uninstaling the exhaust manifold lower heat shield. First disconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor then remove the crankshaft sensor bolt and sensor itself. When installing the crankshaft position sensor begin by securing it with the crankshaft sensor bolt until you reach a torque of 10 N.m (89 lb in). Reinstall the exhaust manifold lower heat shield after reinstating the engine wiring harness electrical connector to the CKP sensor . Complete the necessary crankshaft position system variation learn procedure.

How to replace the Crankshaft Position Sensor on GMC Sierra 1500?

The Crankshaft Position Sensor replacement requires Starter removal as a first step. Working through the wheel well opening disconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. First clean the area surrounding the ckp sensor then remove the bolt and sensor itself. Start your installation by installing the ckp sensor and follow all directions related to fasteners. Put the ckp sensor bolt in position after which you must tighten it to 25 nm (18 lb ft). Reinstall the Starter while reconnecting the engine wiring harness electrical connector to the ckp sensor. Always run the crankshaft position system variation learn procedure after replacing or removing the ckp sensor.

OEM GMC Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Crankshaft Position Sensors found

View related parts
GMC Crankshaft Position Sensor, Green Line
Part Number: 12588992
$33.33 MSRP: $62.60
You Save: $29.27 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor
- Replaced by: 12674703
Fits the following GMC Models:
- Terrain | 2010-2017 | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
GMC Crankshaft Position Sensor
Part Number: 97321397
$75.63 MSRP: $118.46
You Save: $42.83 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following GMC Models:
- Sierra 2500 HD | 2005 | Base, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 | 2005 | Base, SLE, SLT, WT | 8 Cyl 6.6 L DIESEL
View related parts
GMC Crankshaft Position Sensor
Part Number: 12672641
$36.18 MSRP: $73.50
You Save: $37.32 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 98079567
Fits the following GMC Models:
- Savana 2500 | 2010-2016 | Base | 8 Cyl 6.6 L DIESEL
- Savana 3500 | 2010-2016 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
- Sierra 2500 HD | 2015-2016 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
- Sierra 3500 HD | 2015-2016 | Base, Denali, SLE, SLT | 8 Cyl 6.6 L DIESEL
View More
View related parts
GMC Knock Sensor
Part Number: 12663209
$4.19 MSRP: $7.57
You Save: $3.38 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Sierra 1500 | 2019-2023 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 40009075
$9.92 MSRP: $17.72
You Save: $7.80 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 55495265
Fits the following GMC Models:
- Sierra 1500 | 2020-2023 | AT4, AT4X, Denali, Denali Ultimate, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Sierra 1500 Limited | 2022 | AT4, Denali, Elevation, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon | 2021-2023 | Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 55593759
$30.69 MSRP: $57.64
You Save: $26.95 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following GMC Models:
- Canyon | 2016-2022 | All Terrain, AT4, Denali, Elevation, SLE, SLT | 4 Cyl 2.8 L DIESEL
- Savana 2500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
- Savana 3500 | 2017-2022 | Base, LS, LT | 4 Cyl 2.8 L DIESEL
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 55578624
$19.53 MSRP: $35.34
You Save: $15.81 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
Fits the following GMC Models:
- Terrain | 2018-2019 | SLE, SLT | 4 Cyl 1.6 L DIESEL
View related parts
GMC Crankshaft Position Sensor
Part Number: 12575172
$78.47 MSRP: $142.01
You Save: $63.54 (45%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Position Sensor
- Replaces: 12576123, 12556427
Fits the following GMC Models:
- Savana 3500 | 2001-2002 | Base, SLT | 8 Cyl 8.1 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Sierra 3500 Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 8.1 L GAS
- Yukon XL 2500 | 2001-2006 | SLE, SLT | 8 Cyl 8.1 L GAS
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 12706708
$7.18 MSRP: $12.82
You Save: $5.64 (44%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 55507118
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
- Canyon | 2023 | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
- Sierra 1500 | 2019-2023 | Base, Elevation, Pro, SLE | 4 Cyl 2.7 L GAS
View More
View related parts
GMC Knock Sensor
Part Number: 55503494
$14.50 MSRP: $25.88
You Save: $11.38 (44%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaced by: 12737536
Fits the following GMC Models:
- Acadia | 2020-2023 | Denali, SLE, SLT | 4 Cyl 2.0 L GAS
View related parts
GMC Crankshaft Position Sensor
Part Number: 10456614
$56.75 MSRP: $205.92
You Save: $149.17 (73%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Knock Sensor; Crankshaft Sensor
- Replaces: 10456134
Fits the following GMC Models:
- Sonoma | 1996 | SL, SLE, SLS | 4 Cyl 2.2 L GAS
View related parts
GMC Crankshaft Position Sensor
Part Number: 12667201
$23.26 MSRP: $43.68
You Save: $20.42 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaced by: 12712848
Fits the following GMC Models:
- Sierra 1500 | 2016-2023 | AT4, AT4X, Base, Denali, Denali Ultimate, Elevation, Pro, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
- Yukon | 2021-2023 | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Yukon XL | 2021-2023 | AT4, Denali, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
Fits the following GMC Models:
- Savana 1500 | 2003-2007 | Base, LS, LT, SLE | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Savana 2500 | 2003-2007 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Savana 3500 | 2003-2007 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 1500 | 1999-2006 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 Classic | 2007 | Denali, Hybrid, SL, SLE, SLT, WT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Sierra 1500 HD | 2005-2006, 2001-2003 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 1500 HD Classic | 2007 | SLE, SLT | 8 Cyl 6.0 L GAS
- Sierra 2500 | 1999-2004 | Base, SL, SLE, SLT, WT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD | 2001-2006 | Base, SL, SLE, SLT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
- Sierra 2500 HD Classic | 2007 | SL, SLE, SLT, WT | 8 Cyl 6.0 L GAS
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 12588097
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
Fits the following GMC Models:
- Canyon | 2004-2007 | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Crankshaft Position Sensor
Part Number: 12592515
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
Fits the following GMC Models:
- Canyon | 2008-2012 | SL, SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Knock Sensor
Part Number: 10456287
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Control Module; ESC Sensor; Sensor
- Replaces: 10456017
Fits the following GMC Models:
- C1500 | 1990-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 8 Cyl 5.0 L GAS
- C2500 | 1990-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.0 L GAS
- K1500 | 1990-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 8 Cyl 5.0 L GAS
- K2500 | 1998, 1990-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.0 L GAS
- Savana 2500 | 1996-2002 | Base, SLE, SLT | 8 Cyl 5.0 L GAS
- Sonoma | 1992-1993 | Base, SLE, SLS | 6 Cyl 2.8 L GAS
View More
View related parts
GMC Knock Sensor
Part Number: 10456019
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
Fits the following GMC Models:
- C1500 | 1993-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 8 Cyl 5.0 L GAS
- C2500 | 1993-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.0 L GAS
- K1500 | 1993-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 8 Cyl 5.0 L GAS
- K2500 | 1993-1995 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.0 L GAS
- Yukon | 1994-1995 | Base, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 12557046
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Position Sensor
- Replaces: 10154687
Fits the following GMC Models:
- C1500 | 1997 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- C1500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C2500 | 1997-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- C2500 Suburban | 1997-1999 | Base, SLE, SLT | 8 Cyl 6.5 L DIESEL
- C3500 | 1997-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- G3500 | 1996 | Magnavan, Rally, Rally Camper Special, Rally STX, Vandura, Vandura Special | 8 Cyl 6.5 L DIESEL
- K1500 | 1997-1998 | Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 8 Cyl 6.5 L DIESEL
- K1500 Suburban | 1997-1999 | Base, SLE, SLT
- K2500 | 1997-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 6.5 L DIESEL
- K2500 Suburban | 1997-1999 | Base, SLE, SLT
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 12703627
$58.96 MSRP: $105.28
You Save: $46.32 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
Fits the following GMC Models:
- Canyon | 2009-2012 | SLE, SLT | 8 Cyl 5.3 L GAS
- Envoy | 2005-2009 | Denali | 8 Cyl 5.3 L GAS
- Envoy XL | 2003-2006 | Denali, SLE, SLT | 8 Cyl 5.3 L GAS
- Envoy XUV | 2004-2005 | SLE, SLT | 8 Cyl 5.3 L GAS
- Savana 1500 | 2008-2014 | Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Savana 2500 | 2008-2020 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Savana 3500 | 2008-2020 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
- Sierra 2500 HD | 2007-2019 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Sierra 3500 HD | 2007-2019 | Base, Denali, SLE, SLT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View More
View related parts
GMC Crankshaft Position Sensor
Part Number: 24575636
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Crankshaft Position Sensor; Crankshaft Sensor
Fits the following GMC Models:
- Sonoma | 1997-2003 | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS

| Page 1 of 2 |Next >

1-20 of 36 Results

GMC Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
12703627
Q: How to replace the Crankshaft Position Sensor on GMC Canyon?
A: Initially raise the vehicle for support before you begin Crankshaft Position Sensor replacement. Remove the power connector of the engine harness from the OBD II connector of the crankshaft position sensor. Then unscrew the bolt holding the sensor inside the engine block and extract the sensor from its position. Discard both O-ring seals. New O-ring seals require installation on the CKP sensor before applying a light layer of clean engine oil for lubrication. Install the CKP sensor into its block position before you apply GM P/N 12346004 (Canadian P/N 10953480) sealer to the threads of the sensor bolt. Remember to follow fastener safety instructions. Use 10 Nm (89 lb in) torque when installing the CKP sensor bolt. Begin by reconnecting the engine wiring harness electrical connector to the CKP sensor then lower the vehicle for crankshaft (CKP) system variation learn.
Crankshaft Position Sensor
12613030
Q: How to Properly Remove and Install a Crankshaft Position Sensor on GMC Acadia?
A: The first step toward crankshaft position sensor replacement involves uninstaling the exhaust manifold lower heat shield. First disconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor then remove the crankshaft sensor bolt and sensor itself. When installing the crankshaft position sensor begin by securing it with the crankshaft sensor bolt until you reach a torque of 10 N.m (89 lb in). Reinstall the exhaust manifold lower heat shield after reinstating the engine wiring harness electrical connector to the CKP sensor . Complete the necessary crankshaft position system variation learn procedure.
Crankshaft Position Sensor
12595966
Q: How to replace the Crankshaft Position Sensor on GMC Sierra 1500?
A: The Crankshaft Position Sensor replacement requires Starter removal as a first step. Working through the wheel well opening disconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. First clean the area surrounding the ckp sensor then remove the bolt and sensor itself. Start your installation by installing the ckp sensor and follow all directions related to fasteners. Put the ckp sensor bolt in position after which you must tighten it to 25 nm (18 lb ft). Reinstall the Starter while reconnecting the engine wiring harness electrical connector to the ckp sensor. Always run the crankshaft position system variation learn procedure after replacing or removing the ckp sensor.