How to replace the starter motor on GMC Yukon?

Take off the Starter motor by first removing the negative Battery Cable. Lift the vehicle and then remove the oil pan skid plate if you have it. Next, take out the transmission cover bolt and Starter bolts. Unplug the engine wiring harness electrical connector from the oil level sensor, without allowing the Starter to hang off the cables or wires; instead, do not use a rope or mechanics wire for support. Slide the Starter forward until it clears the transmission and supports it correctly. Lower the vehicle halfway, unscrew the right front wheel and tire. To remove Starter engine wiring harness lead nut and lead terminal from the Starter, working through the right wheel well opening. You need to remove the Starter solenoid cable clip bolt off the frame and the solenoid cable nut and solenoid cable of the Starter. Pull the Starter from the wheel well opening. When replacing the Starter, unsnap transmission cover and eliminate the Starter heat shield. For installation replace the Starter heat shield and snap in the transmission cover onto the Starter. Install the Starter from the wheel well opening and connect the wire from the Starter solenoid to the Starter attaching the nut and tightening it only 9 nm (80 lb in). Attach the Starter solenoid cable clip to the frame and tighten the clip bolt up to 10 nm (89 lb in). Install engine wiring harness lead terminal to the Starter and connect lead nut with 3.4 nm (30 lb in) torque. Start position by placing the Starter in the position and installing bolts on Starter and tightening to the coils of 50 nm (37 lb ft). Remove and reinstall the right front wheel & tire, lift the vehicle, and hook the engine wiring harness electrical connector to the oil level sensor. Finally install the transmission cover bolt that has to be manually tight at 9 nm (80lb in) if equipped, reinstall the oil pan skid plate, reconnect the negative cable.

OEM GMC Yukon Starter

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Starters found

View related parts
GMC Yukon Starter
Part Number: 10465167
$177.01 MSRP: $349.48
You Save: $172.47 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC Yukon | Base, Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Starter
Part Number: 89018123
$296.33 MSRP: $586.32
You Save: $289.99 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Replaces: 89017440, 89017631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Yukon | SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Yukon Starter
Part Number: 89017630
$270.11 MSRP: $534.27
You Save: $264.16 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Replaces: 10465550, 10465560, 89017442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Yukon | Denali | 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Starter
Part Number: 19180529
$233.65 MSRP: $461.90
You Save: $228.25 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 GMC Yukon | SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Yukon Starter
Part Number: 19180528
$170.34 MSRP: $476.91
You Save: $306.57 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 GMC Yukon | Denali | 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Starter
Part Number: 12695760
$181.92 MSRP: $361.10
You Save: $179.18 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter Assembly-.; Starter, Starter Motor
- Replaced by: 12736813
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Yukon Starter
Part Number: 89017844
$294.17 MSRP: $646.70
You Save: $352.53 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 GMC Yukon | Denali | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Starter
Part Number: 10465385
$332.72 MSRP: $657.20
You Save: $324.48 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 GMC Yukon
View related parts
GMC Yukon Starter
Part Number: 55509960
$171.72 MSRP: $310.79
You Save: $139.07 (45%)
ADD TO CART
Product Specifications
- Other Name: Starter Assembly-.; Starter, Starter Motor
- Replaced by: 40009059
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL
View related parts
GMC Yukon Starter
Part Number: 12724245
$114.04 MSRP: $226.36
You Save: $112.32 (50%)
ADD TO CART
Product Specifications
- Other Name: Starter Assembly-.; Starter, Starter Motor
- Replaced by: 12740952
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Starter
Part Number: 12689541
$187.29 MSRP: $360.91
You Save: $173.62 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter Assembly-.; Starter, Starter Motor
- Replaced by: 12732343
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, Denali Ultimate, SLE, SLT | 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Starter
Part Number: 10496873
$91.56 MSRP: $180.92
You Save: $89.36 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Motor, Starter Motor; Starter Motor
- Replaces: 01988714, 10455305, 1988714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 GMC Yukon | Base, GT, SLE, SLT, Sport | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Starter
Part Number: 12724247
$111.69 MSRP: $221.26
You Save: $109.57 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter Assembly-.; Starter, Starter Motor
- Replaced by: 12742105
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 GMC Yukon | Denali, SLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Starter
Part Number: 10465561
$211.04 MSRP: $638.21
You Save: $427.17 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Replaces: 10465548
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 GMC Yukon | SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
GMC Yukon Starter
Part Number: 10465054
$419.20 MSRP: $756.08
You Save: $336.88 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter (Remanufacture); Starter Motor; Starter Motor, Starter Motor; Starter, Starter Motor; Motor, Starter Motor
- Replaces: 10465053, 10497165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 GMC Yukon | Base, SL, SLE, SLT, Sport | 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Starter
Part Number: 10465463
Product Specifications
- Other Name: Starter, Starter Motor; Starter Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 GMC Yukon | SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS

GMC Yukon Starter

Our website offers an extensive catalog of genuine GMC Yukon Starter at unbeatable prices. Every OEM GMC Yukon Starter comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon Starter Parts Questions & Experts Answers

Starter
19180529
Q: How to replace the starter motor on GMC Yukon?
A: Take off the Starter motor by first removing the negative Battery Cable. Lift the vehicle and then remove the oil pan skid plate if you have it. Next, take out the transmission cover bolt and Starter bolts. Unplug the engine wiring harness electrical connector from the oil level sensor, without allowing the Starter to hang off the cables or wires; instead, do not use a rope or mechanics wire for support. Slide the Starter forward until it clears the transmission and supports it correctly. Lower the vehicle halfway, unscrew the right front wheel and tire. To remove Starter engine wiring harness lead nut and lead terminal from the Starter, working through the right wheel well opening. You need to remove the Starter solenoid cable clip bolt off the frame and the solenoid cable nut and solenoid cable of the Starter. Pull the Starter from the wheel well opening. When replacing the Starter, unsnap transmission cover and eliminate the Starter heat shield. For installation replace the Starter heat shield and snap in the transmission cover onto the Starter. Install the Starter from the wheel well opening and connect the wire from the Starter solenoid to the Starter attaching the nut and tightening it only 9 nm (80 lb in). Attach the Starter solenoid cable clip to the frame and tighten the clip bolt up to 10 nm (89 lb in). Install engine wiring harness lead terminal to the Starter and connect lead nut with 3.4 nm (30 lb in) torque. Start position by placing the Starter in the position and installing bolts on Starter and tightening to the coils of 50 nm (37 lb ft). Remove and reinstall the right front wheel & tire, lift the vehicle, and hook the engine wiring harness electrical connector to the oil level sensor. Finally install the transmission cover bolt that has to be manually tight at 9 nm (80lb in) if equipped, reinstall the oil pan skid plate, reconnect the negative cable.