How to replace the inner rear axle wheel seal on GMC Yukon XL 2500?

Start the inner rear Axle Shaft seal replacement by first raising the vehicle and removing the tire and wheel assembly together with the axle shafts and Differential assembly. Mount the smallest expanding driver and small driving washer onto the expander assembly so their separation lines remain aligned with each other. First place the expander assembly between the driver bar extension and driver bar. The camshaft bearing service set (J 33049) needs to be inserted through the Axle Shaft seal until it reaches the axle tube. Turn the driving bar clockwise against the Axle Shaft seal while holding the expander assembly nut. Drive out the seal using a hammer together with a camshaft bearing service set (J 33049). During installation feed the drive bar extension from the camshaft bearing service set (J 33049) into the opposite side Axle Shaft tube. Place the Differential seal installer inner (part J 45177) onto the camshaft bearing service set (J 33049) and fit the axle tube with the Axle Shaft seal. Use Differential seal installer - inner (J 45177) together with camshaft bearing service set (J 33049) to drive the Axle Shaft seal into the tube by holding the tools with a hammer. The repair process requires final installation of the Differential assembly and axle shafts together with tire and wheel assembly before lowering the vehicle.

OEM GMC Yukon XL 2500 Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheel Seals found

View related parts
GMC Yukon XL 2500 Output Shaft Seal, Front Inner
Part Number: 22761722
$21.98 MSRP: $37.76
You Save: $15.78 (42%)
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Front Drive Axle Inner Shaft; Axle Seal; Inner Seal; Outer Seal; Seal, Front Axle
- Position: Front Inner
- Replaces: 12471591, 12471682, 15801507, 12479012, 26059623
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Output Shaft Seal, Front
Part Number: 19169124
$11.50 MSRP: $18.04
You Save: $6.54 (37%)
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Drive Shaft; Axle Seal; Seal, Front Axle
- Position: Front
- Replaces: 12471683, 12471592, 12479155, 26059624
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Oil Seal, Rear
Part Number: 19180849
$15.56 MSRP: $29.22
You Save: $13.66 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Bearing Seal; Axle Seals; Wheel Bearing Oil Seal; Rear Axle Shaft Seal.
- Position: Rear
- Replaces: 15522062, 14047298, 26057167
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Hub & Bearing Seal, Front
Part Number: 15017464
$6.54 MSRP: $11.68
You Save: $5.14 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Front Wheel Bearing; Wheel Hub Repair Kit; Wheel Seal; Axle Seal; Front Hub Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Axle Seal, Rear
Part Number: 15823962
$29.22 MSRP: $54.88
You Save: $25.66 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Hub Seal; Axle Seals; Hub Seals; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15007008, 26061024
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013, 2000-2006 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Oil Seal, Rear
Part Number: 12471686
$12.28 MSRP: $22.22
You Save: $9.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Axle Shaft; Wheel Seal; Axle Seal; Hub Seal; Bearing Seal; Axle Seals; Axle Bearing Seal; Seal, Rear Wheel Bearing Oil
- Position: Rear
- Replaces: 15522060, 26037309
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

GMC Yukon XL 2500 Wheel Seal

Our website offers an extensive catalog of genuine GMC Yukon XL 2500 Wheel Seal at unbeatable prices. Every OEM GMC Yukon XL 2500 Wheel Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon XL 2500 Wheel Seal Parts Questions & Experts Answers

Axle Seal, Rear
15823962
Q: How to replace the inner rear axle wheel seal on GMC Yukon XL 2500?
A: Start the inner rear Axle Shaft seal replacement by first raising the vehicle and removing the tire and wheel assembly together with the axle shafts and Differential assembly. Mount the smallest expanding driver and small driving washer onto the expander assembly so their separation lines remain aligned with each other. First place the expander assembly between the driver bar extension and driver bar. The camshaft bearing service set (J 33049) needs to be inserted through the Axle Shaft seal until it reaches the axle tube. Turn the driving bar clockwise against the Axle Shaft seal while holding the expander assembly nut. Drive out the seal using a hammer together with a camshaft bearing service set (J 33049). During installation feed the drive bar extension from the camshaft bearing service set (J 33049) into the opposite side Axle Shaft tube. Place the Differential seal installer inner (part J 45177) onto the camshaft bearing service set (J 33049) and fit the axle tube with the Axle Shaft seal. Use Differential seal installer - inner (J 45177) together with camshaft bearing service set (J 33049) to drive the Axle Shaft seal into the tube by holding the tools with a hammer. The repair process requires final installation of the Differential assembly and axle shafts together with tire and wheel assembly before lowering the vehicle.