Make sure this part fits

GM 12560115
Crank Pulley

1997-2005 GM

Customer Questions & Expert Answers (8)
GM 12560115 Crank Pulley
GM 12560115 Crank Pulley
  • Part Description
    Pulley
  • Replaces
    12553474
  • Manufacturer
    General Motors
Make sure this part fits
$111.27 MSRP: $189.42
You Save: $78.15 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Cadillac CTSV8 Cyl 5.7 L GAS
    1997-2004 Chevrolet Corvette50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z068 Cyl 5.7 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12560115 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12560115 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the harmonic balancer on Cadillac CTS? Posted by Customer
    A:
    The crankshaft balancer replacement procedure begins with the removal of A/C Compressor and power steering pump Drive Belt before generator and water pump Drive Belt comes off. Then raise the vehicle into the air and provide support to it. The Harmonic Balancer puller (J24420-C) functions to uninstall the crankshaft balancer. Begin by setting the crankshaft balancer in its place and afterward install the generator and water pump Drive Belt followed by the A/C Compressor and power steering pump Drive Belt.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the harmonic balancer on Chevrolet Corvette? Posted by Customer
    A:
    In order to replace the Harmonic Balancer, the first step is to disconnect the negative Battery Cable. Release accessory Drive Belt tensioner and remove the Drive Belt from the engine. Next, pull out and relocate the most critical module -- the electronic brake control module, from the bracket, the power steering gear and the Starter motor will also be removed. Remove Power Steering Cooler bolts from the front crossmember, remove the function of power steering and reposition it. Loosen the air conditioning(T/C) belt tensioner and deglue a/c Drive Belt off the engine. Next, take out the Harmonic Balancer. To get started with the installation, install the first Harmonic Balancer, then the a/c Drive Belt to the engine and then the power steering gear followed by Power Steering Cooler to the front cross member. Secure the Power Steering Cooler bolts with 11 nm (97 inch lbs). The next thing is to install the Starter motor, lower the vehicle, and install the accessory Drive Belt to the engine. Re-attach the electronic brake control module to the bracket and then reconnect the negative Battery Cable, securing the negative Battery Cable bolt at 15 nm (11 ft. Lbs.). Finally, program the transmitters.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the used balancer bolt for the 2000 Chevrolet Corvette? Posted by Customer
    A:
    Tighten the used balancer bolt to 330 Nm (240 ft. lbs.), then remove it to check the balancer's installation depth.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What is the first step to replace the crankshaft balancer for the 2003 Chevrolet Corvette? Posted by Customer
    A:
    Remove the Air Conditioning (A/C) drive belt, power steering gear, and starter motor, followed by the right transmission cover and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How do you remove the crankshaft balancer for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    Use the Crankshaft Balancer Remover (J 41816) and Crankshaft End Protector (J 41816-2) to remove the balancer, then clean and inspect it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How is the new crankshaft balancer bolt installed for the 2004 Chevrolet Corvette? Posted by Customer
    A:
    Install a new crankshaft balancer bolt, tightening it first to 50 Nm (37 ft. lbs.) and then to 140 degrees using the J36660-A.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What are the final steps after installing the crankshaft balancer for the 2004 Cadillac CTS? Posted by Customer
    A:
    Reinstall the drive belt and the intake air resonator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Crank Pulley 12560115 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12560115 Crank Pulley is available in the market under the name GM Harmonic Balancer. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12560115 Crank Pulley fits certain Chevrolet Corvette models, as well as Cadillac CTS models.
The original GM component designated by manufacturer part number 12560115 maintains top performance when functioning as the Pulley unit. The component 12560115 is constructed from durable material and its dimensions span 8.5 x 8.5 x 3.4 inches while weighing 8.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Vibration Damper; Balancer, Engine Crankshaft And Camshaft Balancer. The part 12560115 has available replacement options 12553474. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.