Make sure this part fits

GM 24507944
Alternator Brace, Rear

1999-2007 GM

Customer Questions & Expert Answers (7)
GM 24507944 Alternator Brace, Rear
  • Part Description
    Brace-Generator Rear; Alternator Bracket
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1999-2004 Buick RegalGS, GSE6 Cyl 3.8 L GAS
    1999 Buick RivieraBase6 Cyl 3.8 L GAS
    2005 Chevrolet ImpalaBase, LS, SS6 Cyl 3.8 L GAS
    2004-2005 Chevrolet Monte CarloLT, SS6 Cyl 3.8 L GAS
    2000-2003 Pontiac BonnevilleSSEi6 Cyl 3.8 L GAS
    1999-2007 Pontiac Grand PrixGT, GTP6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24507944 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24507944 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace an Alternator Bracket on Buick Regal? Posted by Customer
    A:
    Replacing the generator brace requires first removing both the fuel injector sight shield and the evap canister purge solenoid valve. Start by removing the generator rear brace nut then the generator rear brace bolt before eliminating the generator rear brace. Start by positioning the generator rear brace then torque on the generator rear brace bolt followed by the generator rear brace nut . The generator bolts require a specific installation order; tighten generator rear brace bolt and generator rear brace nut at 50 n.m (37 lb ft) torque. Place back the evap canister purge solenoid valve together with the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the alternator bracket on Buick Regal? Posted by Customer
    A:
    The generator brace replacement process starts with removing the fuel injector sight shield together with the evap canister purge solenoid valve. First remove the generator rear brace nut followed by the generator rear brace bolt before extracting the generator rear brace. Reposition the generator rear brace first before starting the generator rear brace bolt by hand and nut . Installation requires following the specified bolt sequence while tightening the generator rear brace bolt to 50 n.m (37 lb ft) followed by tightening the generator rear brace nut to the same torque value of 50 n.m (37 lb ft). Reinstall the evap canister purge solenoid valve as well as the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you secure the generator rear brace during installation for the 2002 Buick Regal? Posted by Customer
    A:
    Secure it with the generator rear brace bolt and the generator rear brace nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Alternator Bracket
    Q:
    What is the first step to replace the generator brace for the 2005 Chevrolet Impala? Posted by Customer
    A:
    Remove the generator rear brace nut and the generator rear brace bolt, then take out the generator rear brace.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Alternator Bracket
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Begin by installing the generator rear brace.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Alternator Bracket
    Q:
    What should be installed after the generator rear brace for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    The generator pivot bolt should be installed next, followed by the generator rear brace nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Alternator Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Alternator Brace, Rear 24507944 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24507944 Alternator Brace, Rear is available in the market under the name GM Alternator Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24507944 Alternator Brace, Rear fits certain Chevrolet Impala, Monte Carlo models, as well as Buick Regal, Riviera, Park Avenue. Additionally, it is compatible with Pontiac Grand Prix, Bonneville models.
The original GM component designated by manufacturer part number 24507944 maintains top performance when functioning as the Brace-Generator Rear; Alternator Bracket unit at its Rear. The component 24507944 is constructed from durable material and its dimensions span 13.0 x 4.3 x 1.5 inches while weighing 1.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Brace; Alternator Rear Brace; Purge Valve Bracket; Bracket; Brace, Generator Mounting. The part 24507944 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.