Make sure this part fits

GM 22705303
Support Bracket, Driver Side

2004-2011 GM

Customer Questions & Expert Answers (10)
GM 22705303 Support Bracket, Driver Side
  • Part Description
    Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
    2004-2008 Chevrolet MalibuBase, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2006-2007 Pontiac G6Base, GT, GTP4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22705303 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22705303 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be applied to the pad hardware mating surfaces of the caliper bracket for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Apply a thin layer of high-temperature silicone brake lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be applied to the brake hardware mating surfaces for the 2008 Chevrolet HHR? Posted by Customer
    A:
    A very thin coat of high temperature silicone brake lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    How should the brake caliper bracket bolts be secured for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Install the brake caliper bracket bolts and tighten them to 115 N.m (85 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step in the process for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Remove the support and reposition the brake caliper over the brake pads and the mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    How should the brake pad retainers be prepared before installation for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Clean the brake pad mating surfaces of the brake pad retainers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be done after installing the brake caliper bracket for the 2007 Chevrolet Malibu? Posted by Customer
    A:
    Install the brake caliper mounting bracket bolts, tightening them to 115 N.m (85 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the first step to remove and replace the brake caliper bracket on the front for the 2007 Chevrolet Malibu? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic's wire without disconnecting the hydraulic brake flexible hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be ensured during the installation of the new brake caliper bracket for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Attach the new brake caliper bracket without using thread locking compounds or standard taps on the self-retaining fastener joint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step in the process for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Remove the support and reposition the brake caliper over the brake pads and to the mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Support Bracket, Driver Side 22705303 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22705303 Support Bracket, Driver Side is available in the market under the name GM Brake Caliper Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22705303 Support Bracket, Driver Side fits certain Chevrolet Malibu, HHR models, as well as Pontiac G6 models.
The original GM component designated by manufacturer part number 22705303 maintains top performance when functioning as the Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket unit at its Driver Side. The component 22705303 is constructed from durable material and its dimensions span 7.9 x 4.1 x 3.6 inches while weighing 3.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper Support. The part 22705303 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.