Make sure this part fits

GM 20977459
Positive Cable

2008-2011 GM

Customer Questions & Expert Answers (9)
GM 20977459 Positive Cable
  • Part Description
    Cable Assembly-Battery Positive; Battery Cables
  • Replaces
    25844843, 20875872
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number20977459
    Part DescriptionCable Assembly-Battery Positive; Battery Cables
    Other NamesCable, Battery(Positive)
    Item Dimensions4.0 x 11.1 x 11.3 inches
    Item Weight4.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25844843, 20875872
    ManufacturerGeneral Motors
    SKU20977459
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2008-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20977459 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20977459 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the procedure for removing the positive battery cable grommet for the 2009 Buick Lucerne? Posted by Customer
    A:
    Unseat the positive battery cable grommet from the front of the dash and carefully pull the cable through the front of the dash and out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What are the final steps after installing the negative battery cable for the 2008 Buick Lucerne? Posted by Customer
    A:
    Connect the body harness electrical connector to the battery current sensor, then to the negative battery cable electrical connector, and finally reconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What are the final steps after installation for the 2008 Buick Lucerne? Posted by Customer
    A:
    Reinstall the carpet and surge tank, ensuring all components are secured and properly connected, and finally reconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you access the junction block for the 2010 Buick Lucerne? Posted by Customer
    A:
    Disengage the junction block cover lock tabs and remove the junction block cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the next step after positioning the new negative battery cable for the 2008 Cadillac DTS? Posted by Customer
    A:
    Place the negative battery cable eyelet over the hole in the floor pan and install the negative battery cable ground bolt, tightening it to 36 N.m (27 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the procedure for unseating the positive battery cable grommet for the 2009 Cadillac DTS? Posted by Customer
    A:
    Remove the positive battery clips from the side engine compartment and carefully unseat the positive battery cable grommet from the front of the dash.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be removed after separating the cable from the battery for the 2008 Cadillac DTS? Posted by Customer
    A:
    Remove the positive battery cable retainer from the floor pan stud, followed by the nut and terminal from the junction block stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you finalize the installation of the positive battery cable for the 2010 Cadillac DTS? Posted by Customer
    A:
    Install the positive battery cable retainer to the rocker panel, terminal to the junction block stud, and nut to the junction block stud, tightening to 15 Nm (11 lb ft). Attach the positive battery cable retainer to the floor pan stud, position the positive battery cable to the battery, and tighten the positive battery cable nut to 15 Nm (11 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 20977459, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 20977459 Positive Cable. It is sometimes referred to as GM Battery Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 20977459 Positive Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery