Make sure this part fits

GM 84755503
Caliper, Rear Driver Side

2003-2020 GM

Customer Questions & Expert Answers (12)
GM 84755503 Caliper, Rear Driver Side
  • Part Description
    Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Brake Caliper
  • Position
    Rear Driver Side
  • Replaces
    15751175, 84394396, 84046262
  • Manufacturer
    General Motors
Make sure this part fits
$99.94 MSRP: $195.65
You Save: $95.71 (49%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2020 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2020 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2020 GMC Savana 2500Base, LS, LT, SLE4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2020 GMC Savana 3500Base, LS, LT, SLE4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 84755503 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 84755503 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the guide pin bolts for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten to 34 N.m (25 lb ft) for the 15 Series and 72 N.m (53 lb ft) for the 25/35 Series.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after removing the brake caliper from the mounting bracket for the 2007 Chevrolet Express 3500? Posted by Customer
    A:
    Attach the new brake caliper to the mounting bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done before installing the boot over the piston for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Lubricate the brake caliper bores and pistons with the same brake fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the new piston seals and brake caliper bore seal grooves be lubricated for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    With brake fluid (GM P/N 12388967, Canadian P/N 992667).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after tightening the guide pin bolts for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Remove the rubber cap or plug, install 2 NEW copper brake hose gaskets, and connect the brake hose by tightening the brake hose to caliper bolt to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done with the brake caliper bore and piston for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Lubricate the brake caliper bore and piston, then install the boot over the piston, ensuring the fold faces the brake caliper housing piston bore opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the first piston for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Repeat the installation process for the remaining piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for the guide pin bolts for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Tighten the guide pin bolts to 34 Nm (25 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the procedure for assembly for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Install the brake caliper bleed screw, tightening it to 12 Nm (106 inch lbs.), followed by the bleed screw cap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do after installing the brake hose for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Tighten it to 44 Nm (32 ft. lbs.) using 2 new copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done to the brake caliper housing and bleeder valve for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Blow out all passages in the brake caliper housing and the bleeder valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper, Rear Driver Side 84755503 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 84755503 Caliper, Rear Driver Side is available in the market under the name GM Brake Caliper Repair Kit, Brake Calipers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 84755503 Caliper, Rear Driver Side fits certain Chevrolet Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500 models.
The original GM component designated by manufacturer part number 84755503 maintains top performance when functioning as the Caliper Assembly-Rear Brake (W/O Brake Pads & Bracket); Brake Caliper unit at its Rear Driver Side. The component 84755503 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Caliper, Wheel Brake Cylinder/Caliper; Axle, Rear Axle. The part 84755503 has available replacement options 15751175, 84394396, 84046262. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.