Make sure this part fits

GM 18043518
Overhaul Kit, Rear

2000-2006 GM

Customer Questions & Expert Answers (21)
GM 18043518 Overhaul Kit, Rear
  • Part Description
    Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number18043518
    Part DescriptionCaliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit
    Other NamesCaliper Kit, Wheel Brake Cylinder/Caliper
    Item Dimensions7.4 x 4.2 x 12.5 inches
    Item Weight1.30 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU18043518
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 Chevrolet TahoeBase, Limited, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    2000-2006 GMC YukonDenali, SL, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 GMC Yukon XL 1500Denali, SL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 18043518 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18043518 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you prevent damage to the piston during removal for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Place a thin piece of wood in front of the piston.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done after installing the brake caliper for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake hose fitting, then install 2 new copper brake hose gaskets and the brake hose to caliper bolt, tightening it to 40 N.m (30 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the torque specification for the brake caliper mounting bracket bolts for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Tighten the bolts to 200 N.m (148 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step in the process for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, lower the vehicle, and gradually apply the brake pedal to approximately 2/3 of its travel distance, slowly release it, and repeat until a firm pedal is obtained.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after cleaning the brake hose for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Remove the brake hose to caliper bolt and the brake hose itself, discarding the two copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the next step after securing the brake hose for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Remove the brake hose to caliper bolt and discard the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be checked for corrosion and wear for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The mounting bracket should be checked for corrosion and wear, and replaced if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the final step in the brake caliper replacement process for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Bleed the hydraulic brake system, reinstall the tire and wheel assembly, remove the safety stands, lower the vehicle, and fill the master cylinder reservoir to the proper level with clean brake fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to replace the rear brake caliper bracket for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic's wire or an equivalent tool while keeping the hydraulic flexible brake hose connected to prevent damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do to prevent fluid loss and contamination for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Clean the brake hose end and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done to the brake caliper housing and bleeder valve for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Blow out all passages in the brake caliper housing and the brake caliper bleeder valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done to the brake caliper housing and bleeder valve for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Blow out all passages in the brake caliper housing and bleeder valve.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the procedure for removing the brake caliper for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the brake caliper from the vehicle, placing a thin piece of wood in front of the piston to prevent damage, and then remove the piston by directing compressed air into the brake hose inlet fitting port.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected for excessive scoring or corrosion for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    The brake caliper bore and piston seal groove.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should the boot be installed over the piston for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    With the fold facing the brake caliper housing piston bore opening, seating the boot into the brake caliper bore groove.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should you do after removing the caliper for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Inspect the caliper assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What is the first step to overhaul the rear brake caliper for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Remove it from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be inspected on the brake caliper for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Inspect the brake caliper bore and piston seal groove for excessive scoring or corrosion, replacing the brake caliper housing if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    How should residue be cleaned from the brake components for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Clean all residue from the brake pad guiding surfaces and all parts not included in the repair kit with denatured alcohol, then dry them with filtered unlubricated compressed air.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    Q:
    What should be done for the remaining piston for the 2004 GMC Yukon? Posted by Customer
    A:
    Repeat the same process.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Calipers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 18043518, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 18043518 Overhaul Kit, Rear. It is sometimes referred to as GM Brake Caliper Repair Kit, GM Brake Calipers. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 18043518 Overhaul Kit, Rear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery