Make sure this part fits

GM 18060909
Knuckle, Passenger Side

2001-2005 GM

Customer Questions & Expert Answers (7)
GM 18060909 Knuckle, Passenger Side
  • Part Description
    Knuckle Assembly, Steering (Includes O-Ring)
  • Position
    Passenger Side
  • Replaced By
    25850471
  • Manufacturer
    General Motors
Make sure this part fits
$319.17 MSRP: $525.78
You Save: $206.61 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Chevrolet Avalanche 1500Base, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L GAS
    2001-2004 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2003 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2001-2005 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2001-2004 GMC Sierra 1500Base, C3, Denali, HT, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2003 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2001-2004 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2005 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 18060909 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 18060909 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the outer tie rod and the wheel hub and bearing assembly for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Reconnect the ESC link rod to the sensor if equipped, install the tire and wheel, load the torsion bars, remove the safety stands, lower the vehicle, and check the wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you separate the upper ball joint from the steering knuckle for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Use the Ball Joint Separating Tool (J 43631) to remove the retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the first step to replace the rear steering knuckle for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you connect the upper ball joint for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Connect the upper ball joint and install its retaining nut, tightening it to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should be done after removing the tire and wheel for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the wheel hub and bearing, and disconnect the Real Time Damping (RTD) link rod from the sensor if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the first step to replace the steering knuckle in a torsion bar suspension system for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Knuckle, Passenger Side 18060909 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 18060909 Knuckle, Passenger Side is available in the market under the name GM Steering Knuckle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 18060909 Knuckle, Passenger Side fits certain Chevrolet Silverado 1500, Suburban 1500, Avalanche 1500 models, as well as GMC Sierra 1500, Yukon XL 1500, Sierra 1500 HD models.
The original GM component designated by manufacturer part number 18060909 maintains top performance when functioning as the Knuckle Assembly, Steering (Includes O-Ring) unit at its Passenger Side. The component 18060909 is constructed from durable material and its dimensions span 15.4 x 12.1 x 6.8 inches while weighing 20.10 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 18060909 has available replacement options listed under 25850471. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.