Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12475480
Lower Control Arm, Passenger Side

1999-2014 GM

Customer Questions & Expert Answers (19)
GM 12475480 Lower Control Arm, Passenger Side
GM 12475480 Lower Control Arm, Passenger Side
GM 12475480 Lower Control Arm, Passenger Side
  • Part Description
    Arm Kit, Steering Knuckle & Control Arm Assembly; Suspension Control Arm and Ball Joint.
  • Position
    Passenger Side
  • Replaces
    12472818
  • Manufacturer
    General Motors
Make sure this part fits
$282.85 MSRP: $445.05
You Save: $162.20 (37%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 12475480 Lower Control Arm, Passenger Side is Ref No. 6 in the diagram below

    2005 Chevy Silverado 1500 Lower Control Arm, Passenger Side Diagram for 12475480
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12475480

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2005 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2003-2005 Chevrolet Express 3500Base, LS8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    1999-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12475480 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12475480 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear axle lower control arm for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What components need to be reinstalled after connecting the lower ball joint for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Reinstall the torsion bars, the shock absorber lower nut and bolt, and the stabilizer shaft links to the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What is the first step in the installation process for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the lower control arm and the retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What should be removed after raising for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    The lower control arm retaining nuts and the retaining bolt.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    How do you disconnect the lower ball joint from the steering knuckle for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Use the J 43631 Ball Joint Remover and J 45851 Ball Joint Separator Protector Adapters.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What is the next step after disconnecting the upper control arm for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the upper control arm nuts and adjustment cams, followed by the upper control arm bolts, and finally take out the upper control arm.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What additional step is needed for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What is the torque specification for tightening the upper control arm nuts for the 25/35 Series 4WD for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Tighten the nuts to 190 Nm (140 lb ft).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What should be done if it is equipped with a Real Time Damping (RTD) sensor for the 2002 Chevrolet Suburban 1500? Posted by Customer
    A:
    Disconnect the RTD sensor.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    How do you disconnect the lower ball joint for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Take off the lower ball joint retaining nut and disconnect the lower ball joint stud from the steering knuckle using the J 43631 Ball Joint Remover and J 45851 Ball Joint Separator Protector Adapters.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What is the final step after tightening the bolts for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Reconnect the ESC sensor if equipped and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What is the torque specification for the lower ball joint retaining nut for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Tighten it to 100 Nm (74 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    How do you disconnect the upper control arm from the steering knuckle for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Remove the upper ball joint retaining nut and use the J 43631 (Ball Joint Remover) and J 45851 (Ball Joint Separator Protector Adapters).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    How do you disconnect the lower ball joint from the steering knuckle for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Take off the lower ball joint retaining nut and use the J 43631 Ball Joint Remover and J 45851 Ball Joint Separator Protector Adapters.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What is the torque specification for the shock absorber lower retaining nut and bolt for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Tighten it to 80 Nm (59 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What should be done after reinstalling the retaining bolts for the brake hose and wheel speed sensor brackets for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Tighten them to 9 Nm (80 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What should be done after installing the lower control arm for the 2005 GMC Yukon? Posted by Customer
    A:
    Install the lower control arm retaining nut and tighten the retaining bolts to 120 Nm (89 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    Q:
    What is the next step after removing the upper control arm for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Install the new upper control arm.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm, Passenger Side 12475480 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12475480 Lower Control Arm, Passenger Side is available in the market under the name GM Control Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12475480 Lower Control Arm, Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Express 1500 models, as well as GMC Sierra 1500, Yukon, Savana 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 12475480 maintains top performance when functioning as the Arm Kit, Steering Knuckle & Control Arm Assembly; Suspension Control Arm and Ball Joint. unit at its Passenger Side. The component 12475480 is constructed from durable material and its dimensions span 22.1 x 22.3 x 5.3 inches while weighing 27.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12475480 has available replacement options 12472818. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.