Make sure this part fits

GM 10238859
Intake Manifold

1996-2002 GM

Customer Questions & Expert Answers (10)
GM 10238859 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Position
    Center
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10238859
    Part DescriptionManifold, Engine Fuel Intake Manifold
    Item Dimensions16.8 x 8.7 x 9.0 inches
    Item Weight3.90 Pounds
    PositionCenter
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10238859
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2002 Chevrolet Express 2500Base, LS8 Cyl 6.5 L DIESEL
    1996-2002 Chevrolet Express 3500Base, LS8 Cyl 6.5 L DIESEL
    1996-2002 GMC Savana 2500Base, SLE, SLT8 Cyl 6.5 L DIESEL
    1996-2002 GMC Savana 3500Base, SLE, SLT8 Cyl 6.5 L DIESEL
  • Customer Questions & Expert Answers

    Q:
    Is this 10238859 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10238859 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the upper intake manifold attaching studs for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten them first to 5 Nm (44 inch lbs.) and then to 9 Nm (80 inch lbs.) on the final pass.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the accelerator control cable bracket for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Take off the accelerator control cable bracket from the throttle body and intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What is the next step after installing the gasket for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Apply a 5 mm (0.197 inch) bead of adhesive GM P/N 12346141 or equivalent to the front top of the engine block, extending the bead 13 mm (0.50 inch) onto each lower intake manifold gasket, and repeat this process for the rear top of the engine block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be reconnected after installing the upper intake manifold for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Reconnect the accelerator control cable and cruise control cable to the throttle shaft, install the EVAP canister purge solenoid valve, and reattach the fuel pipes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the upper intake manifold be installed for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Place the upper intake manifold onto the engine and tighten the studs to 12 Nm (44 inch lbs.) on the first pass and 10 Nm (89 inch lbs.) on the second pass.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How do you ensure correct engine timing for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Position the engine to number one cylinder top dead center, remove the spark plug for number one cylinder, rotate the crankshaft until number one cylinder is in the compression stroke, align the reference marks, and reinstall the spark plug and distributor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What components need to be removed before accessing the lower intake manifold for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Remove the air cleaner intake duct, engine cover, coolant reservoir, upper radiator hose, inlet heater hose, outlet heater hose, and coolant by-pass hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What hoses need to be reinstalled for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the AIR bypass hose assembly if equipped, the upper radiator hose, inlet and outlet heater hoses, and coolant bypass hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    How should the upper intake manifold be installed for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Place it onto the engine, tightening the studs on the first pass to 12 Nm (44 inch lbs.) and on the second pass to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10238859, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10238859 Intake Manifold. It is sometimes referred to as GM Intake Manifold. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10238859 Intake Manifold. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery