Make sure this part fits

GM 26060414
Axle Shaft, Rear

1999-2007 GM

Customer Questions & Expert Answers (18)
GM 26060414 Axle Shaft, Rear
  • Part Description
    Shaft, Rear Axle Drive
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26060414 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26060414 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after pulling the wheel drive shaft through the lower control arm opening for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Clean the steering knuckle and the wheel drive shaft splines and threads, ensuring they are dry and free of grease, dirt, and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft or gasket for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after gripping the axle shaft flange for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Twist to begin the removal and then take out the axle shaft from the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done to the axle shaft during removal for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential and remove the C-lock from the button end of the axle shaft, ensuring not to rotate the axle shaft to avoid misaligning the gears.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the axle flange bolts be installed for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the axle flange bolts and tighten them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the 10.5 inch axle flange bolts for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Tighten the rear axle flange bolts to 156 N.m (115 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be removed after the rear steering gear assembly for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the steering knuckle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you loosen the axle shaft for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Lightly tap the axle shaft with a soft-faced hammer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be reinstalled after securing the new axle shaft for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Reinstall the steering knuckle assembly, followed by the rear steering gear assembly, then the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How can you protect the wheel drive shaft boots during removal and installation for the 2004 GMC Yukon? Posted by Customer
    A:
    Wrap shop towels around both the inner and outer wheel drive shaft boots.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Why is it important not to rotate the axle shaft during removal for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    To avoid misaligning the gears.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be removed after raising for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Remove the tire and wheel assembly, followed by the rear steering gear assembly and the steering knuckle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the final steps after installing the pinion shaft locking bolt for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Reinstall the rear cover and gasket, rear wheel speed sensor, brake caliper, and tire and wheel assembly, fill the rear axle, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you install the new axle shaft for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Carefully insert the axle shaft into the rear axle housing, allowing the splines to engage the differential side gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for removing the axle shaft for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential, remove the C-lock from the button end of the axle shaft, and then take the axle shaft out of the housing without rotating it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after placing the C-lock for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Pull the shaft flange outward to seat the lock in the differential gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should you do at the end of the process for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Inspect and add axle lubricant to the axle housing if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft, Rear 26060414 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26060414 Axle Shaft, Rear is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26060414 Axle Shaft, Rear fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 26060414 maintains top performance when functioning as the Shaft, Rear Axle Drive unit at its Rear. The component 26060414 is constructed from durable material and its dimensions span 34.4 x 8.1 x 8.1 inches while weighing 28.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Shafts. The part 26060414 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 26060414. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.