Make sure this part fits

GM 25939260
Trailing Arm, Rear

2008-2015 Cadillac CTS

Customer Questions & Expert Answers (9)
GM 25939260 Trailing Arm, Rear
GM 25939260 Trailing Arm, Rear
  • Part Description
    Arm Assembly-Rear Suspension Trailing; Suspension Trailing Arm
  • Position
    Rear
  • Replaces
    15267639
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2015 Cadillac CTSBase, Luxury, Performance, Premium, V, Vsport, Vsport Premium4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25939260 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25939260 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is used to extract the ball joint stud from the steering knuckle for the 2008 Cadillac CTS? Posted by Customer
    A:
    The Ball Joint Separator (J 43631).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2008 Cadillac CTS? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done to the power steering gear for clearance for the 2009 Cadillac CTS? Posted by Customer
    A:
    Raise the power steering gear as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step after reassembling everything for the 2009 Cadillac CTS? Posted by Customer
    A:
    Remove the support and lower the vehicle, checking the rear wheel alignment afterward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you install the new trailing arm for the 2010 Cadillac CTS? Posted by Customer
    A:
    Position the trailing arm in the mounting bracket and on the knuckle, then install the trailing arm bolt, ensuring to follow fastener precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How should the lower ball joint be connected during installation for the 2010 Cadillac CTS? Posted by Customer
    A:
    Connect it to the steering knuckle and install a new front lower control arm front nut, tightening it to 40 Nm (30 lb ft) and then an additional 120-degree turn.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after tightening the front trailing arm nut for the 2008 Cadillac CTS? Posted by Customer
    A:
    Install the front mounting bolts for the rear suspension support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the torque specification for the front trailing arm nut for the 2009 Cadillac CTS? Posted by Customer
    A:
    Tighten it to 150 Nm (111 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Trailing Arm, Rear 25939260 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25939260 Trailing Arm, Rear is available in the market under the name GM Control Arm, Trailing Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25939260 Trailing Arm, Rear fits certain Cadillac CTS models.
The original GM component designated by manufacturer part number 25939260 maintains top performance when functioning as the Arm Assembly-Rear Suspension Trailing; Suspension Trailing Arm unit at its Rear. The component 25939260 is constructed from durable material and its dimensions span 20.8 x 2.9 x 2.4 inches while weighing 4.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Arm, Rear Axle Control Arm. The part 25939260 has available replacement options 15267639. Each vehicle needs 2 units of the part marked as SKU 25939260. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.