Make sure this part fits

GM 26098390
Axle Shaft, Rear

2002-2004 GM

Customer Questions & Expert Answers (13)
GM 26098390 Axle Shaft, Rear
  • Part Description
    Shaft Kit, Rear Axle Drive
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Avalanche 1500Base, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L GAS
    2003-2004 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    2002-2004 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2003 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    2002-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2002-2004 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2002-2004 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26098390 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26098390 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the drift from the rotor for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Detach the stabilizer shaft link from the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after removing the tire and wheel for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Next, remove the flange bolts and lightly tap the axle shaft with a soft-faced hammer to loosen it.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What are the final steps after installing the pinion shaft locking bolt for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Reinstall the rear cover and gasket, rear wheel speed sensor, brake caliper, and tire and wheel assembly, fill the rear axle, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How should the axle flange bolts be installed for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the axle flange bolts and tighten them to 156 Nm (115 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the order of reassembly after installing the new axle shaft for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the steering knuckle assembly, followed by the rear steering gear assembly, then the tire and wheel assembly, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the next component to take out after the tire and wheel assembly for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the rear steering gear assembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the next step after removing the axle shaft for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the new axle shaft and secure it with the spring loaded lock clip.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the installation process for the axle shaft for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Insert the axle shaft into the rear axle housing, ensuring the splines engage the differential side gear, and tap the end with a soft-faced mallet if needed.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What is the procedure for axles with a locking differential for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    For those with a locking differential, withdraw the shaft partially and rotate the case until the pinion shaft touches the housing. Use a screwdriver or similar tool to rotate the lock until it aligns with the thrust block.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    How do you remove the lock clip from the axle shaft end for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    The lock clip is spring loaded and fits securely in the axle shaft slot; it may require a screwdriver or related tool to push it off, and pushing the axle shaft inwards towards the gears can assist in this process.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be done after removing the drift from the rotor for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Detach the stabilizer shaft link from the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    Q:
    What should be removed after the tire and wheel assembly for the 2004 GMC Yukon? Posted by Customer
    A:
    Remove the brake caliper and rear wheel speed sensor.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft, Rear 26098390 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26098390 Axle Shaft, Rear is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26098390 Axle Shaft, Rear fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 26098390 maintains top performance when functioning as the Shaft Kit, Rear Axle Drive unit at its Rear. The component 26098390 is constructed from durable material and its dimensions span 39.3 x 5.5 x 5.6 inches while weighing 36.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Shafts. The part 26098390 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 26098390. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.