Make sure this part fits

GM 19416895
Ball Joint, Front Lower

1984-2005 GM

Customer Questions & Expert Answers (11)
GM 19416895 Ball Joint, Front Lower
  • Part Description
    Stud Kit, Front Lower Control Arm Ball
  • Position
    Front Lower
  • Replaces
    09767281, 9767281, 19122185
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19416895
    Part DescriptionStud Kit, Front Lower Control Arm Ball
    Other NamesBall Joints; Lower Ball Joint Kit for Steering Knuckle and Front Wheel Control Arm.
    Item Dimensions7.0 x 4.5 x 4.5 inches
    Item Weight2.00 Pounds
    PositionFront Lower
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces09767281, 9767281, 19122185
    Require Quantity2
    ManufacturerGeneral Motors
    SKU19416895
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1991-1996 Buick Commercial ChassisBase8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1984-1989 Buick ElectraEstate Wagon, Limited, Park Avenue6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1990 Buick LeSabreCollector's Edition, Custom, Estate Wagon, Limited6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1987 Buick RegalBase, GNX, Grand National, Limited, T-Type6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1991-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1987-1992 Cadillac BroughamBase, d'Elegance8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1984-1987 Cadillac DeVilleBase, Cabriolet, d'Elegance, Touring8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
    1993-1996, 1984-1986 Cadillac FleetwoodBase, Brougham, Brougham d'Elegance, Formal8 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1985-1992 Chevrolet CamaroBase, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 19416895 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19416895 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the brackets for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Remove the cotter pin and the upper ball joint retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you release the upper ball joint for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Take out the cotter pin and the upper ball joint retaining nut. Using a pry bar under the upper control arm, pry upward while a helper hammers the steering knuckle near the upper ball joint stud to release it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What tool is used to remove the rivets for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    A pin punch is used to remove the rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How is horizontal looseness in ball joints assessed for the 2004 Chevrolet S10? Posted by Customer
    A:
    Position the J 8001 Dial Indicator against the lowest outboard point on the wheel rim and rock the wheel in and out, ensuring the reading does not exceed 2.00 mm (0.080 inch).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the method to release the upper ball joint for the 2002 Chevrolet S10? Posted by Customer
    A:
    Use a pry bar under the upper control arm to pry upward while a helper hammers the steering knuckle near the upper ball joint stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step in the installation process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Place the lower ball joint onto the lower control arm, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the next step after drilling the pilot holes for the 2001 GMC Jimmy? Posted by Customer
    A:
    Drill the rivet heads away with a 12.7 mm (1/2 inch) drill.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you reconnect the brackets to the upper control arm for the 2001 GMC Jimmy? Posted by Customer
    A:
    Reconnect the wheel speed sensor wiring harness bracket and brake hose bracket to the upper control arm, securing them with the mounting bolt and nut tightened to 24 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you disconnect the lower ball joint for the 2000 GMC Jimmy? Posted by Customer
    A:
    Disconnect the cotter pin from the lower ball joint stud and remove the ball joint to steering knuckle nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What tool is used to remove the rivets for the 2004 GMC Sonoma? Posted by Customer
    A:
    A pin punch is used to remove the rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19416895, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19416895 Ball Joint, Front Lower. It is sometimes referred to as GM Ball Joint. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19416895 Ball Joint, Front Lower. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery