Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19259958
Window Switch, Driver Side

2000-2002 GM

Customer Questions & Expert Answers (11)
GM 19259958 Window Switch, Driver Side
GM 19259958 Window Switch, Driver Side
GM 19259958 Window Switch, Driver Side
GM 19259958 Window Switch, Driver Side
  • Part Description
    Switch, Door And End Gate Electrical; Door Window Switch
  • Position
    Driver Side
  • Replaces
    15054161, 15753934
  • Manufacturer
    General Motors
Make sure this part fits
$94.46 MSRP: $137.53
You Save: $43.07 (32%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 2000 GMC Yukon Window Switch, Driver Side Diagram for 19259958
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19259958

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002 Chevrolet Avalanche 1500Base, North Face, On Road Edition, Z718 Cyl 5.3 L GAS
    2002 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    2000-2002 Chevrolet Silverado 1500Base, LS, LT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2001-2002 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    2000-2002 Chevrolet Silverado 2500Base, LS, LT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2002 Chevrolet Silverado 2500 HDBase, LS, LT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2002 Chevrolet Silverado 3500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2000-2002 Chevrolet Suburban 1500Base, LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19259958 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19259958 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power door lock switch in the front on Chevrolet Suburban 2500? Posted by Customer
    A:
    The front power Door Lock Switch replacement begins by removing the power accessory switch panel followed by disconnecting the electrical connector from the Door Lock Switch. Remove the screws that fasten the Door Lock Switch and extract both the power door lock and power window from the switch panel. First install the power door lock and Power Window Switch assembly inside the switch panel by pushing the front tabs before rocking the switch for full Door Lock Switch engagement. After installing the needed screws to secure the Door Lock Switch proceed to reconnect the electrical connector before completing the installation with the power accessory switch plate.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Power Door Lock Switch on Chevrolet Suburban 1500? Posted by Customer
    A:
    Starting the power Door Lock Switch replacement requires the removal of the power accessory switch panel first. The first step requires disconnecting the electrical connector from the Door Lock Switch followed by removing all screws that secure the Door Lock Switch. The power window along with Door Lock Switch must be unlatched from the switch panel. Insert the power door lock and Power Window Switch assembly into the switch panel by implementing front tabs first before rocking the switch for complete Door Lock Switch seating. You should lock the door switch with screws while you reattach the electrical connector along with the installation of the power accessory switch plate.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear door power window switch on Chevrolet Suburban 2500? Posted by Customer
    A:
    Using a small flat-bladed tool handle the door power window switch detachment from the door trim panel. Pull the power switch electric connector free from the module. Connect the electrical connector to the switch first before pressing the switch into the positioning slot of the door trim panel until it seats correctly.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power window switch on GMC Yukon XL 1500? Posted by Customer
    A:
    Starting the power window switch replacement requires the power accessory switch panel removal followed by electrical connector detachment from the power window switch. Start by disconnecting the power window switch electrical connector from the accessory panel after removing its screws. Then lift the rear part of the switch to extract it from the panel. The installation starts with inserting the front tabs of the switch into the switch panel then applying gentle rocking motions to confirm full seating of the switch. You should tighten the window switch screws to 2 N.m torque level (18 lb in). Set the power accessory switch panel in its place after you connect the electrical connector to the window switch.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after positioning the switch assembly for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Secure the door lock switch with screws, reconnect the electrical connector, and finally, install the power accessory switch plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    What should be done after disconnecting the electrical connector for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Next, remove the screws from the window switch and lift the rear of the switch to slide it out from the switch panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the final step after installing the window switch for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Connect the electrical connector to the window switch and finally reinstall the power accessory switch panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What tool can be used to pry out the switch from the case for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    A small screwdriver can be used to pry out the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    Q:
    How do you remove the rear door power window switch for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Carefully pry the door power window switch from the door trim panel using a small flat blade tool, then disconnect the electrical connector from the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Window Switch
    Q:
    What is the first step to replace the power door lock switch for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the power accessory switch panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Switch, Driver Side 19259958 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19259958 Window Switch, Driver Side is available in the market under the name GM Power Window Switch, Door Lock Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19259958 Window Switch, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade EXT models.
The original GM component designated by manufacturer part number 19259958 maintains top performance when functioning as the Switch, Door And End Gate Electrical; Door Window Switch unit at its Driver Side. The component 19259958 is constructed from durable material and its dimensions span 6.5 x 3.4 x 3.2 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch. The part 19259958 has available replacement options 15054161, 15753934. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.