Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25864383
Level Sensor

1994-2016 GM

Customer Questions & Expert Answers (7)
GM 25864383 Level Sensor
GM 25864383 Level Sensor
GM 25864383 Level Sensor
  • Part Description
    Switch Kit, Windshield Washer; Washer Fluid Level Sensor
  • Replaces
    15809926, 22110978
  • Manufacturer
    General Motors
Make sure this part fits
$31.51 MSRP: $59.17
You Save: $27.66 (47%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 25864383 Level Sensor is Ref No. 15 in the diagram below

    1996 Oldsmobile Aurora Level Sensor Diagram for 25864383
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25864383

  • Vehicle Fitment

    Year Make Model Trim Engine
    1994-1996 Buick Commercial ChassisBase8 Cyl 5.7 L GAS
    2006-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    1994-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.7 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    1994-1996 Cadillac FleetwoodBase, Brougham8 Cyl 5.7 L GAS
    2004-2005 Chevrolet ClassicBase, LS4 Cyl 2.2 L GAS
    1997-2004 Chevrolet Corvette50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z068 Cyl 5.7 L GAS
    2006-2013 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, Police, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25864383 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25864383 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Wiper Switch on Buick LaCrosse? Posted by Customer
    A:
    Turning off the sir system is the first step to replace the wiper and washer switch. Take off both Steering Column trim panels and Steering Column wiring harness securing straps (1,2). Locate and remove the connectors from the switch module while remembering how the Steering Column wires should be installed during replacement. Peel back the wire harness cover at the bottom Steering Column then withdraw the wire bundle. Unplug electrical connectors number 1 and 3 from the windshield wiper and washer switch. Press the locking tab on the windshield wiper and washer switch and take the switch off the Steering Column. To put in the new switch, first fit the windshield wiper and washer switch onto the Steering Column then connect the electrical connectors 1 and 3. Support the wire harness on the Steering Column bottom and place the wire harness shield in position. Then attach and connect the window wiper and washer switch electrical parts before installing the wiring harness ties (1,2). Use the windshield wiper and washer switch to activate sir.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Change the Wiper Switch on a Buick LaCrosse? Posted by Customer
    A:
    Make sure to deactivate the sir system first, after which you should carefully follow the proper steps. Take off the steering column trim covers and cut open the steering column wiring harness tie straps. Connectors should be removed from the module, and the wire harness shield at the bottom of the steering column should be folded down to pull out the wire harness , keeping track of its original direction. Take off the electrical connectors (1,3) from the windshield wiper and washer switch, then push down the locking tab on the switch so you can take it off the steering column. For installation, put the new windshield wiper and washer switch onto the steering column and plug in the electrical connectors (1,3). Reconnect the wire harness to the wire harness shield on the steering column, put the switch's connector in place, and make sure the tie straps (1,2) are tight. In the last step, fit the steering column trim covers back on and turn the sir system back on.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for installing the new switch for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Attach the new windshield wiper and washer switch to the steering column and connect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Switch
    Q:
    What is the next step after removing the steering column covers for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    Disconnect the electrical connector from the wiring harness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Switch
    Q:
    How do you remove the wiper/washer switch from the steering column lock module for the 2000 Chevrolet Corvette? Posted by Customer
    A:
    Release the upper and lower retaining clips to slide the wiper/washer switch out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Switch
    Q:
    What are the final steps after reconnecting the electrical connector for the 2002 Chevrolet Corvette? Posted by Customer
    A:
    Reinstall the upper and lower steering column covers, followed by the tilt wheel lever and the driver knee bolster trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Level Sensor 25864383 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25864383 Level Sensor is available in the market under the name GM Wiper Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25864383 Level Sensor fits certain Chevrolet Malibu, Impala, Classic models, as well as Cadillac DTS, Fleetwood. Additionally, it is compatible with Buick LaCrosse, Lucerne, Roadmaster and Pontiac Grand Prix, Grand Am models.
The original GM component designated by manufacturer part number 25864383 maintains top performance when functioning as the Switch Kit, Windshield Washer; Washer Fluid Level Sensor unit. The component 25864383 is constructed from durable material and its dimensions span 3.4 x 2.3 x 1.7 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Level Indicator; Fluid Level Sensor; Indicator; Sensor, Windshield Washer. The part 25864383 has available replacement options 15809926, 22110978. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.