Make sure this part fits

GM 15116861
Seat Heat Switch, Passenger Side

2003-2007 GM

Customer Questions & Expert Answers (31)
GM 15116861 Seat Heat Switch, Passenger Side
  • Part Description
    Switch, Seat Heater; Seat Heater Switch
  • Position
    Passenger Side
  • Replaces
    15179135
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 1500Base, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15116861 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15116861 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Seat Heater Switch on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    The front door trim panel must be removed to access the front seat heater switch. After disconnecting the electrical connector you should proceed. To remove the switch and front seat heater switch assembly both retaining clips must be released before proceeding to plug it out. First seal the front seat heater switch assembly into its front trim panel slot then complete the installation with electrical connector reconnection and front trim panel assembly.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Seat Heater Switch on Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The front door trim panel must be removed to access the front seat heater switch. After disconnecting the electrical connector you should proceed. To remove the switch and front seat heater switch assembly both retaining clips must be released before proceeding to plug it out. First seal the front seat heater switch assembly into its front trim panel slot then complete the installation with electrical connector reconnection and front trim panel assembly.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Seat Heater Switch on GMC Sierra 1500 Classic? Posted by Customer
    A:
    The front door trim panel must be removed to access the front seat heater switch. After disconnecting the electrical connector you should proceed. To remove the switch and front seat heater switch assembly both retaining clips must be released before proceeding to plug it out. First seal the front seat heater switch assembly into its front trim panel slot then complete the installation with electrical connector reconnection and front trim panel assembly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the front door trim panel for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Disconnect the electrical connector and release the retaining clips of the front seat memory switch assembly to remove the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the memory seat switch for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    First, remove the front door trim panel and disconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you install the new switch for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Position the switch onto the console panel, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    How do you install the new memory seat switch for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Press the front seat memory switch assembly into the front trim panel until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the front door trim panel for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Disconnect the electrical connector and release the retaining clips for the front seat heater switch assembly to remove the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the next step after disconnecting the electrical connector for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Take out the seat heater switch retaining screws and remove the switch from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the first step to replace the power seat switch for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Remove the power seat switch bezel from the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you install the new lumbar switch for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Position the lumbar switch onto the power seat switch bezel and secure it with the screws, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the center console end panel for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Take out the seat heater switch retaining screws and remove the switch from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the torque specification for tightening the retaining screw for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install and tighten the retaining screw to 1.6 N.m (14 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the first step to replace the driver seat adjuster memory switch for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Begin by removing the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What do you do after removing the front door trim panel for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Release the retaining clips for the front seat heater switch assembly to remove the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the final step in the installation process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the front trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the next step after removing the switch for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Take out the front seat heater switch assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the first step to replace the heated seat switch in the rear for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the center console end panel and disconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the final step in the process for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reattach the power seat switch bezel to the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the bezel for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the screws securing the power seat switch to the bezel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after installing the new front seat heater switch assembly for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Reconnect the electrical connector to the front seat heater switch assembly and reinstall the front trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What is the first step to replace the power seat switch for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the power seat switch bezel from the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    How do you install the new memory seat switch for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Press the front seat memory switch assembly into the front trim panel until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the final step after securing the lumbar switch for the 2004 GMC Yukon? Posted by Customer
    A:
    Reinstall the power seat switch bezel onto the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after removing the center console end panel for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Take out the seat heater switch retaining screws and remove the switch from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    How do you install the new lumbar switch for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Position the lumbar switch onto the power seat switch bezel and ensure to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the lumbar switch for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    First, remove the power seat switch bezel containing the lumbar switch from the seat.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What should be done after installing the new front seat heater switch assembly for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Reconnect the electrical connector to the front seat heater switch assembly and reinstall the front trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Heater Switch
    Q:
    What do you do after removing the front door trim panel for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Release the retaining clips of the front seat memory switch assembly to remove the switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    Q:
    What is the first step to replace the memory seat switch for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Remove the front door trim panel and disconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Seat Heat Switch, Passenger Side 15116861 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15116861 Seat Heat Switch, Passenger Side is available in the market under the name GM Seat Heater Switch, Seat Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15116861 Seat Heat Switch, Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15116861 maintains top performance when functioning as the Switch, Seat Heater; Seat Heater Switch unit at its Passenger Side. The component 15116861 is constructed from durable material and its dimensions span 10.7 x 2.3 x 0.5 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch. The part 15116861 has available replacement options 15179135. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.