Make sure this part fits

GM 15906127
Turn Signal Switch

2004-2012 GM

Customer Questions & Expert Answers (18)
GM 15906127 Turn Signal Switch
GM 15906127 Turn Signal Switch
  • Part Description
    Switch, Turn Signal Lamp; Multi Purpose Switch
  • Replaces
    15190615, 15135024
  • Manufacturer
    General Motors
Make sure this part fits
$154.69 MSRP: $252.38
You Save: $97.69 (39%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2006-2010 Hummer H3Alpha, Base, Championship Series, X5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2009-2010 Hummer H3TAlpha, Base5 Cyl 3.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15906127 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15906127 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the headlamp switch for the 2004 Chevrolet Colorado? Posted by Customer
    A:
    First, remove the knee bolster trim panel and the screw retaining the switch to the instrument panel (I/P).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    How should the assembly be secured for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Secure it with the 3 pan head tapping screws, tightening them to 3 Nm (30 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    How do you secure the housing for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Secure the housing with bolts, tightening them to 2.5 N.m (22 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the final step after installing the new switch mounting plate for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Finally, enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the next step after connecting the electrical connector for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Secure the switch to the I/P and install the screw, tightening it to 2.5 N.m (22 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    What should be removed after disabling the SIR system for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Remove the steering wheel and the steering column trim covers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the first step to replace the multifunction turn signal switch for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    First, disable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    How do you disconnect the switch for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the switch electrical connector and remove the switch from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    What is the next step after disconnecting the electrical connector for the 2008 GMC Canyon? Posted by Customer
    A:
    Remove the switch from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    What should be ensured when installing a new multifunction turn signal switch for the 2009 GMC Canyon? Posted by Customer
    A:
    Ensure it is precentered with the centering tab attached; do not remove the tab until installation is complete to avoid misalignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the final step after securing the housing for the 2009 GMC Canyon? Posted by Customer
    A:
    Reinstall the turn signal multifunction switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the first step to replace the multifunction turn signal switch housing for the 2010 GMC Canyon? Posted by Customer
    A:
    First, remove the turn signal multifunction switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    How do you disconnect the switch for the 2009 GMC Canyon? Posted by Customer
    A:
    Disconnect the switch electrical connector and remove the switch from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    How do you secure the switch mounting plate for the 2006 GMC Canyon? Posted by Customer
    A:
    Install 2 washer head screws into the plate, tightening them to 2.5 Nm (22 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the next step after removing the screws for the 2005 GMC Canyon? Posted by Customer
    A:
    Slide the plate off the steering column shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    Q:
    What is the final step after installing the switch for the 2007 GMC Canyon? Posted by Customer
    A:
    Reinstall the knee bolster trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Switch
    Q:
    What are the final steps after securing the wiring harness for the 2008 GMC Canyon? Posted by Customer
    A:
    Remove the centering tab, install the steering column trim covers, and reinstall the steering wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Turn Signal Switch 15906127 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15906127 Turn Signal Switch is available in the market under the name GM Dimmer Switch, Headlight Switch, Turn Signal Switch, Wiper Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15906127 Turn Signal Switch fits certain Chevrolet Colorado models, as well as GMC Canyon. Additionally, it is compatible with Hummer H3, H3T models.
The original GM component designated by manufacturer part number 15906127 maintains top performance when functioning as the Switch, Turn Signal Lamp; Multi Purpose Switch unit. The component 15906127 is constructed from durable material and its dimensions span 9.4 x 5.2 x 10.4 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Multifunction Switch; Combination Switch. The part 15906127 has available replacement options 15190615, 15135024. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.