Make sure this part fits

GM 10306794
Drain Tube

2001-2008 GM

Customer Questions & Expert Answers (13)
GM 10306794 Drain Tube
  • Part Description
    Tube, Air Conditioner Evaporator
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2001-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2001-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10306794 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10306794 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the installation process for the new suction hose for the 2006 Buick Terraza? Posted by Customer
    A:
    Place a new sealing washer onto the A/C compressor end of the suction hose, remove the cap or tape from the suction port, and install the suction hose to the A/C compressor, securing it with the nut tightened to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    How do you detach the suction hose from the A/C evaporator tube for the 2005 Buick Terraza? Posted by Customer
    A:
    Remove the suction hose to A/C evaporator tube bolt and detach the suction hose from the A/C evaporator tube, discarding the sealing washer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done at the evaporator tube end during installation for the 2005 Buick Terraza? Posted by Customer
    A:
    Install a new sealing washer at the evaporator tube end, remove the cap or tape from the evaporator tube, and attach the suction hose to the A/C evaporator tube, securing it with a bolt tightened to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done before removing the A/C suction hose for the 2007 Buick Terraza? Posted by Customer
    A:
    Recover the refrigerant from the A/C system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after placing new sealing washers on the A/C suction hose for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Remove the cap or tape from the suction port on the A/C compressor and install the A/C suction hose, tightening the nut to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after reinstalling the radiator air baffle for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Remove the cap or tape from the A/C condenser discharge port and connect the A/C discharge hose to the condenser, securing it with the bolt tightened to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step to replace the suction hose with RPO Code C69 Compressor for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Use the Halogen Leak Detector (J 39400-A) to leak test the fittings of the A/C components after completing the installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after raising and supporting the 2003 Chevrolet Venture? Posted by Customer
    A:
    Obtain a length of replacement line and use a tubing cutter to cut and remove the damaged section.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    How should the damaged line section be removed for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Cut and remove the damaged line section using a tubing cutter, ensuring the replacement line is the same length.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step before starting the repair for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Begin by recovering the refrigerant and draining the coolant if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What steps should be taken to prepare the line ends for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Clean the line ends with the cleaning pad from the A/C Line Repair Kit, prep the ends with LOK prep sealant, and apply one drop of sealing compound to each end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done after disconnecting the suction hose for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Remove the suction hose to compressor nut, then disconnect the suction hose from the compressor and remove the suction hose, discarding the sealing washers and capping or taping off the compressor suction port.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Drain Tube 10306794 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10306794 Drain Tube is available in the market under the name GM A/C Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10306794 Drain Tube fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10306794 maintains top performance when functioning as the Tube, Air Conditioner Evaporator unit. The component 10306794 is constructed from durable material and its dimensions span 5.8 x 4.8 x 0.7 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Tube, A/C Evaporator Core Housing; Tube, A/C Evaporator. The part 10306794 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.