Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
Position: Front Passenger Side
Item Weight: 1.10 Pounds
Item Dimensions: 34.1 x 5.4 x 4.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 19150637
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2004 Chevrolet Silverado 1500 Submodels:
Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
2004 Chevrolet Silverado 1500 Brake Line
With a comprehensive array of OEM 2004 Chevrolet Silverado 1500 Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Silverado 1500 Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Chevrolet Silverado 1500 Brake Line Parts and Q&A
Q: What are the steps and precautions for replacing brake lines on 2004 Chevrolet Silverado 1500?
A: Use double-walled steel brake pipe during replacement to keep your brakes working and wire brakes properly to stop accidents from harming you. Keep the brake pipes set up parallel with each other at a minimum distance of 6 mm (1/4 inch). You should disconnect brake system fittings before removing brake pipe fasteners to take out the pipe from the vehicle. Use the brake pipe properly and put it on as long as moving parts stay 19 mm away from one another. Fasten the brake pipe with its mounts before connecting the fittings to BPMV or wheel jounce hoses where you should tighten the connections to 25 Nm (18 ft. lbs.) and to the master cylinder at the same force. Complete the hydraulic brake system bleed procedure through the ABS automatic pressure release mode.