Make sure this part fits

GM 19150637
Flex Hose, Front Passenger Side

1999-2008 GM

Customer Questions & Expert Answers (29)
GM 19150637 Flex Hose, Front Passenger Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19150637 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19150637 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done to the brake hose end and brake pipe fitting before disconnecting for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Clean all dirt and foreign material, and install a rubber cap or plug on the exposed brake pipe fitting end to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How is the flare created for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Insert the prepared end of the pipe into the dies, tighten the clamping screw, and use the forming mandrel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What components need to be removed after disconnecting the brake pipe fitting for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Remove the brake hose retaining clip from the brake hose mounting bracket, the brake hose bracket bolt from the upper control arm and the steering knuckle, and the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after disconnecting the brake pipe fittings for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the brake pipe fasteners from the vehicle and take out the brake pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose bolt and bracket for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in connecting the brake hose for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Insert the brake hose into the bracket and secure it with the retaining clip, then remove the rubber cap or plug from the brake pipe fitting end and connect the brake pipe fitting end to the brake hose using a backup wrench, tightening to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after securing the brake pipe fasteners for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Connect the brake pipe fittings, tightening them to the brake pressure modulator valve (BPMV) or the wheel jounce hoses to 25 Nm (18 ft. lbs.) and to the master cylinder to the same torque specification.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you connect the brake pipe fitting to the brake hose for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the rubber cap or plug from the exposed brake pipe fitting end and connect it using a backup wrench, tightening the fitting to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should you do again to prevent fluid loss and contamination for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install a rubber cap or plug on the exposed brake pipe fitting ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Use a backup wrench on the brake hose fitting end to disconnect the brake pipe fitting end from the brake hose, then cap the brake pipe fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Using a backup wrench on the hose fitting end, disconnect the brake pipe fitting from the brake hose and cap the fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What type of brake pipe should be used when replacing brake pipes for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Always use double-walled steel brake pipe to prevent brake system failure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Raise and support the vehicle, then clean all dirt and foreign material from the brake hose and brake pipe fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step after completing the installation for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Bleed the hydraulic brake system and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake pipe fittings for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the brake hose lower bracket bolt and the jounce hoses.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured during the replacement of brake pipes for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Ensure careful routing and retention of the replacement brake pipes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be used for installation of the new brake hose for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Use 2 new copper brake hose gaskets, assembling them with the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after attaching the brake hose bolt for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Install the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to prevent fluid loss and contamination for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Clean all dirt from the brake hose and brake pipe fittings, and install a rubber cap or plug on the exposed brake pipe fitting ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is required for the installation of the new brake hose for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Use 2 new copper brake hose gaskets and assemble them with the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is required for installation of the new brake hose for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Use 2 new copper brake hose gaskets, assembling them with the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the required clearance between parallel brake pipes for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Maintain a 6 mm (1/4 inch) clearance between parallel brake pipes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake pipe fitting end to the brake hose for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the rubber cap or plug from the exposed brake pipe fitting end and connect it to the brake hose using a backup wrench, ensuring not to bend the mounting bracket or the brake pipe, and tighten to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the old brake hose for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Take out the brake hose and discard the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in replacing brake pipes for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Begin by disconnecting the brake pipe fittings, removing the brake pipe fasteners, and taking out the brake pipe from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose and brake pipe fittings before disconnecting them for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Clean all dirt and foreign material from the brake hose and brake pipe fittings, and install a rubber cap or plug on the exposed brake pipe fitting ends to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the procedure for flaring the pipe for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Clean the brake pipe and the J 45405 of any contaminants, loosen the die clamping screw, install the corresponding die set into the die cage, insert the prepared end of the pipe, and tighten the clamping screw. Use the appropriate forming mandrel and operate the lever of the J 45405 to create the flare, then insert the finishing cone and repeat the process.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Passenger Side 19150637 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19150637 Flex Hose, Front Passenger Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19150637 Flex Hose, Front Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 19150637 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Passenger Side. The component 19150637 is constructed from durable material and its dimensions span 34.1 x 5.4 x 4.3 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19150637 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.