OEM 2006 Chevrolet Corvette Oil Pressure Switch

2006 Chevrolet Corvette Oil Pressure Switch Parts Questions & Experts Answers

• Q: How to replace the engine oil pressure switch on 2006 Chevrolet Corvette?

  A: The first step to replace an engine oil pressure sensor or switch requires gathering the necessary tool set which includes the oil pressure sensor socket (J 41712). Start the replacement process by first taking off the left engine sight cover while you clean up the space near the oil sensor and switch. Start by disconnecting the vacuum hose that serves the power Brake Booster before removing the electrical connector connected to the oil pressure sensor/switch. Use the oil pressure sensor socket (J 41712) to take out the oil pressure sensor/switch. To reinstall the old sensor you must use threadlocker gm p/n 12346004 (Canadian P/N 10953480) or its equivalent. Use the oil pressure sensor socket (J 41712) to install the oil pressure sensor/switch while tightening it to 20 nm (15 ft. Lbs.). Reattach the electrical connector of the oil pressure sensor/switch followed by replacing the vacuum hose for the power Brake Booster before you install the left engine sight cover.