How to replace the rear brake line on 2007 Chevrolet Colorado?

Start the replacement process by raising the vehicle to check the retaining clip status. Replace the clip if found to be pressed flat or broken. The brake hose replacement starts by taking off the retaining clip from the mounting bracket. Next, use a back up wrench to unlink the Brake Line from the brake hose and place a rubber cap or plug on the exposed brake pipe fitting to block fluid leakage and distortion. Begin by disconnecting the Brake Line to the left Wheel Cylinder and then the Brake Line to the right Wheel Cylinder. Put rubber caps into both brake lines to seal them. Remove the mounting bolt for the brake hose and pull out the back brake hose assembly. Attach the Brake Line to the brake hose using proper connection tools then bolt it with 17 n.m pressure. Slot the new retaining clip for the rear brake hose onto its mounting bracket and fasten the mounting bolt at 19 n.m (14 lb ft). Insert the brake hose fitting in the exposed left Brake Line opening and torque it to 19 n.m (14 lb ft). Connect the brake lines to their brake hoses and set up the right Brake Line before filling the reservoir and servicing the brakes. Finally lower the vehicle.

OEM 2007 Chevrolet Colorado Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
2007 Chevrolet Colorado Flex Hose, Front Driver Side Part Number: 15882536
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15106441
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.1 x 24.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15882536
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Flex Hose Part Number: 22894845
Product Specifications
- Other Name: Hose, Hydraulic Brake; Brake Hose; Piston
- Position: Rear
- Replaces: 25928297
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.4 x 15.8 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22894845
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Flex Hose Part Number: 10363839
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 16.2 x 5.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10363839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2007 Chevrolet Colorado Flex Hose, Front Passenger Side Part Number: 15882535
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15106440
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.1 x 24.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15882535
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Flex Hose, Front Passenger Side Part Number: 15882534
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15101604
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.0 x 18.7 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15882534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Chevrolet Colorado Flex Hose, Front Driver Side Part Number: 15882533
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15101603
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.1 x 18.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15882533
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2007 Chevrolet Colorado Brake Line

With a comprehensive array of OEM 2007 Chevrolet Colorado Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Colorado Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Colorado Brake Line Parts and Q&A

Q: How to replace the rear brake line on 2007 Chevrolet Colorado?
A: Start the replacement process by raising the vehicle to check the retaining clip status. Replace the clip if found to be pressed flat or broken. The brake hose replacement starts by taking off the retaining clip from the mounting bracket. Next, use a back up wrench to unlink the Brake Line from the brake hose and place a rubber cap or plug on the exposed brake pipe fitting to block fluid leakage and distortion. Begin by disconnecting the Brake Line to the left Wheel Cylinder and then the Brake Line to the right Wheel Cylinder. Put rubber caps into both brake lines to seal them. Remove the mounting bolt for the brake hose and pull out the back brake hose assembly. Attach the Brake Line to the brake hose using proper connection tools then bolt it with 17 n.m pressure. Slot the new retaining clip for the rear brake hose onto its mounting bracket and fasten the mounting bolt at 19 n.m (14 lb ft). Insert the brake hose fitting in the exposed left Brake Line opening and torque it to 19 n.m (14 lb ft). Connect the brake lines to their brake hoses and set up the right Brake Line before filling the reservoir and servicing the brakes. Finally lower the vehicle.