How to Replace and Repair a Door Emblem on 2007 GMC Canyon?

Begin door emblem/nameplate replacement by gathering these essential equipment: You need a Heat Gun (J 25070) combined with a 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Start your work with protective tape that protects the emblem while ensuring it stays in position. Direct the Heat Gun (J 25070) at a 152 mm (6 in) distance to circle around the emblem/nameplate surface for 30 seconds. Using a plastic flat-bladed tool carefully remove the emblem/nameplate before cleaning all sticky residue from both the door panel and the emblem's back with adhesive remover. The door surface requires cleaning with VMP (varnish makers and painters) naphtha. Run continuous measurements across the unmarked emblem/nameplate space using tape before determining these specifications: To mark the emblem/nameplate placement on the door, measure 145.0 mm (5.70 in) from the front edge to the emblem and 165.0 mm (6.50 in) from the bottom edge to the front of the emblem with an additional measured length of 28.0 mm (1.11 in) from the door feature line to the emblem front. 145.0 mm (5.70 in) from the front of the door to the emblem/nameplate, 165.0 mm (6.50 in) from the bottom of the door to the front of the emblem/nameplate, and 28.0 mm (1.11 in) from the feature line of the door to the front of the emblem/nameplate. Use the Heat Gun (J 25070) on the door surface to reach a minimum temperature of 21°C (70°F) without touching the adhesive side on the emblem/nameplate. Position the emblem/nameplate's front end directly on the door panel surface as you work to remove all backing materials. Hand roll the emblem/nameplate while ensuring adhesion and observe bonding before stripping tape from the door emblem region.

OEM 2007 GMC Canyon Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
2007 GMC Canyon Letter
Part Number: 15634643
$62.39 MSRP: $89.27
You Save: $26.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Kit, Radiator Grille; Emblem; Nameplate; Emblem Kit, Radiator Grille And Front End Ornamentation
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15634643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Canyon Letter
Part Number: 15634639
$28.22 MSRP: $42.01
You Save: $13.79 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Kit, Radiator Grille; Emblem; Nameplate; Emblem Kit, Radiator Grille And Front End Ornamentation
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15634639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Canyon Nameplate, Rear
Part Number: 15926160
$82.20 MSRP: $117.62
You Save: $35.42 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15207240
- Item Weight: 0.30 Pounds
- Item Dimensions: 17.2 x 1.7 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15926160
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Canyon Submodels:
- SLE, Z71 SLE, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Canyon Nameplate, Rear
Part Number: 10355873
$101.29 MSRP: $150.76
You Save: $49.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15207239
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.0 x 14.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10355873
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Canyon Nameplate
Part Number: 84674406
$52.96 MSRP: $78.83
You Save: $25.87 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-End Gate Divider Name *Chrome; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration
- Replaces: 22884137, 15195869, 15029627
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84674406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Canyon Letter
Part Number: 15634641
$24.51 MSRP: $36.47
You Save: $11.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Kit, Radiator Grille; Emblem; Nameplate; Emblem Kit, Radiator Grille And Front End Ornamentation
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15634641
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 GMC Canyon Emblem
Part Number: 84689784
$11.20 MSRP: $16.67
You Save: $5.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2007 GMC Canyon Submodels:
- SL, SLE, SLT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2007 GMC Canyon Emblem

With a comprehensive array of OEM 2007 GMC Canyon Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Canyon Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Canyon Emblem Parts Questions & Experts Answers

Q: How to Replace and Repair a Door Emblem on 2007 GMC Canyon?
A: Begin door emblem/nameplate replacement by gathering these essential equipment: You need a Heat Gun (J 25070) combined with a 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Heat Gun (J 25070) and 3M(TM) scotch brite molding adhesive remover disk (3M(TM) P/N 07501). Start your work with protective tape that protects the emblem while ensuring it stays in position. Direct the Heat Gun (J 25070) at a 152 mm (6 in) distance to circle around the emblem/nameplate surface for 30 seconds. Using a plastic flat-bladed tool carefully remove the emblem/nameplate before cleaning all sticky residue from both the door panel and the emblem's back with adhesive remover. The door surface requires cleaning with VMP (varnish makers and painters) naphtha. Run continuous measurements across the unmarked emblem/nameplate space using tape before determining these specifications: To mark the emblem/nameplate placement on the door, measure 145.0 mm (5.70 in) from the front edge to the emblem and 165.0 mm (6.50 in) from the bottom edge to the front of the emblem with an additional measured length of 28.0 mm (1.11 in) from the door feature line to the emblem front. 145.0 mm (5.70 in) from the front of the door to the emblem/nameplate, 165.0 mm (6.50 in) from the bottom of the door to the front of the emblem/nameplate, and 28.0 mm (1.11 in) from the feature line of the door to the front of the emblem/nameplate. Use the Heat Gun (J 25070) on the door surface to reach a minimum temperature of 21°C (70°F) without touching the adhesive side on the emblem/nameplate. Position the emblem/nameplate's front end directly on the door panel surface as you work to remove all backing materials. Hand roll the emblem/nameplate while ensuring adhesion and observe bonding before stripping tape from the door emblem region.