How to replace the front brake pads (without J55) on Cadillac DeVille?

Instead of j55, to replace the front brake pads, we should first check the brake master cylinder fluid reserve; if it is above midway between the maximum-full point and the minimum allowable level, drain some to the midway point. Lift and lift the vehicle, then take the tire and wheel assembly. Push a large c-clamp over the brake caliper body, place the ends against the rear of the caliper and the outer Brake Pad, and tighten it until the caliper piston has compressed far enough to slide past the brake rotor. Take off the c-clamp and bottom brake caliper pin bolt and remember to hold the caliper by using heavy mechanic's wire in order to avoid damaging the hydraulic flexible brake hose. Upend the body of the caliper without unhooking the hose and use a large c-clamp with an old inner Brake Pad or block of wood against the caliper piston to compress it as far as it will go. Second, remove the c-clamp and old Brake Pad, or wood block, remove the inboard and outboard brake pads off of the caliper bracket, and check the Brake Pad retainers. Check the damage on caliper bolt suspension boots and replace if necessary, as well as inspecting and replacing the caliper pin bolts if they are corroded. Also, check the caliper piston boot and replace in case of decay. Ouple the Brake Pad retainers and both brake pads to the caliper bracket, and then swing the caliper downward over the pads. Put a thin layer of niglube grease on brake caliper pin bolts before putting the lower brake caliper pin bolt and tightening to 85 nm (63 ft. Lbs.). Take out the wheel and tire assembly, reinstall it, lower the vehicle; with the engine turned off depress the Brake Pedal down to approximately 2/3 of its travel and then release it gently. Do this again and again until you get a firm Brake Pedal which will effectively seat the caliper pistons and brake pads. Lastly, top up the brake master cylinder reservoir to the right level and burn the pads and rotors.

OEM Cadillac DeVille Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Pads found

View related parts
Cadillac DeVille Brake Pads Part Number: 19149251
$46.14 MSRP: $126.84
You Save: $80.70 (64%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 18024939, 18024930, 18040160, 18043995
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Cadillac DeVille | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
Cadillac DeVille Brake Pads, Front Part Number: 19152643
$67.98 MSRP: $126.84
You Save: $58.86 (47%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 18026292, 18040043, 18045379, 18042449, 18048652
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac DeVille | Base, DHS, DTS | 8 Cyl 4.6 L GAS
View related parts
Cadillac DeVille Brake Pads, Front Part Number: 19152666
$69.88 MSRP: $136.82
You Save: $66.94 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 18042214, 18045380, 18048030, 18042442, 88964119
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Cadillac DeVille | Base, Concours, d'Elegance, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
Cadillac DeVille Brake Pads, Front Part Number: 19152498
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 18045381, 18029827, 18024961
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Cadillac DeVille | Base, Concours, d'Elegance | 8 Cyl 4.6 L GAS
View related parts
Cadillac DeVille Brake Pads, Front Part Number: 19242607
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 18024924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Cadillac DeVille | Base, Concours, d'Elegance | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
Cadillac DeVille Brake Pads, Front Part Number: 19167282
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 18024915, 18018354, 18024916
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Cadillac DeVille | Base, Touring | 8 Cyl 4.9 L GAS
View related parts
Cadillac DeVille Brake Pads Part Number: 19152665
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 18024922, 18029826, 18043999, 18024926
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2000 Cadillac DeVille | Base, Concours, d'Elegance, DHS, DTS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

Cadillac DeVille Brake Pad

Want to cut long-term maintenance and repair costs? Choose OEM Brake Pad. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac DeVille parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac DeVille Brake Pad includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Brake Pad is one of the sub assemblies of the braking system in Cadillac DeVille used to grab and rub against the brake rotors as a way of halting the vehicle or simply to reduce the speed. These pads are mostly compound of friction formed by bond to a metal base plate which enables them to take high temperatures produced by brake calipers. The friction lining gradually wears out; thus it must be replaced again and again, usually when wear sensors signal this or when wear indicators make noises. There have been different kinds of Brake Pad used in Cadillac DeVille models including, non-metallic, semi-metallic and ceramic brake pads, each boasting of unique features. Brake pads are vital, even if they are not directly in contact with the brake disc; the right installation of the brake pads together with the other associated trims including the clips and shims are paramount if the premier of these parts are to be achieved. Generally, it is advisable to check and replaced brake pads after every 50000 miles, this would ensure that one is able to achieve effective braking without much problems such as brake fade or uneven wear.

Cadillac DeVille Brake Pad Parts Questions & Experts Answers

Brake Pads, Front
19152666
Q: How to replace the front brake pads (without J55) on Cadillac DeVille?
A:
Instead of j55, to replace the front brake pads, we should first check the brake master cylinder fluid reserve; if it is above midway between the maximum-full point and the minimum allowable level, drain some to the midway point. Lift and lift the vehicle, then take the tire and wheel assembly. Push a large c-clamp over the brake caliper body, place the ends against the rear of the caliper and the outer Brake Pad, and tighten it until the caliper piston has compressed far enough to slide past the brake rotor. Take off the c-clamp and bottom brake caliper pin bolt and remember to hold the caliper by using heavy mechanic's wire in order to avoid damaging the hydraulic flexible brake hose. Upend the body of the caliper without unhooking the hose and use a large c-clamp with an old inner Brake Pad or block of wood against the caliper piston to compress it as far as it will go. Second, remove the c-clamp and old Brake Pad, or wood block, remove the inboard and outboard brake pads off of the caliper bracket, and check the Brake Pad retainers. Check the damage on caliper bolt suspension boots and replace if necessary, as well as inspecting and replacing the caliper pin bolts if they are corroded. Also, check the caliper piston boot and replace in case of decay. Ouple the Brake Pad retainers and both brake pads to the caliper bracket, and then swing the caliper downward over the pads. Put a thin layer of niglube grease on brake caliper pin bolts before putting the lower brake caliper pin bolt and tightening to 85 nm (63 ft. Lbs.). Take out the wheel and tire assembly, reinstall it, lower the vehicle; with the engine turned off depress the Brake Pedal down to approximately 2/3 of its travel and then release it gently. Do this again and again until you get a firm Brake Pedal which will effectively seat the caliper pistons and brake pads. Lastly, top up the brake master cylinder reservoir to the right level and burn the pads and rotors.