How to service the throttle body on Cadillac Seville?

To service the Throttle Body, remove the maf sensor electrical connector, do not score the maf sensor screen, doing so will cause restricted air flow and driveability problems. Lose the intake air duct clamps and remove the mass airflow (MAF) sensor and air cleaner intake duct as a unit. Check the Throttle Body bore & throttle valve plate for deposits and open throttle valve to inspect all surfaces. Do not allow any solvent with methyl ethyl ketone (MEK) in it to avoid damage to the components of the fuel system. Clean the Throttle Body bore and throttle valve plate using a clean towel to wipe using gm top engine cleaner (P/N 1052626 Canada P/N 9g3026), ac-delco carburetor tune-up conditioner (PIN X66-P), or equivalent product. For installation, ensure that outlet of the air cleaner assembly and the maf sensor inlet duct is aligned to reduce incorrect airflow readings that trigger mil or cause driveability issues. Install the maf sensor and air cleaner intake duct in an assembly before clamping the intake air duct clamps to 3 nm (27 lb in) before reattaching the maf sensor electrical connector.

OEM Cadillac Seville Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Throttle Bodies found

View related parts
Cadillac Seville Throttle Body Kit Part Number: 17112137
Product Specifications
- Other Name: Throttle Body
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1989 Cadillac Seville | Base, STS | 8 Cyl 4.5 L GAS
View related parts
Cadillac Seville Throttle Body Kit Part Number: 17111723
Product Specifications
- Other Name: Throttle Body
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987 Cadillac Seville | Base | 8 Cyl 4.1 L GAS
View related parts
Cadillac Seville Throttle Body Kit Part Number: 17111503
Product Specifications
- Other Name: Throttle Body
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986 Cadillac Seville | Base, Elegante | 8 Cyl 4.1 L GAS
View related parts
Cadillac Seville Throttle Body Kit Part Number: 17110663
Product Specifications
- Other Name: Body Assembly, TBI Throttle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Cadillac Seville | Base, Elegante | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Seville Throttle Body Part Number: 17110662
Product Specifications
- Other Name: Body Assembly, TBI Throttle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Cadillac Seville | Base, Elegante | 8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Seville Throttle Body Part Number: 17113387
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Replaces: 17096163
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Throttle Body Part Number: 17112657
Product Specifications
- Other Name: Body, Fuel Injection Air Meter; Body Kit, Throttle Body/Carburetor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Cadillac Seville | Base, STS | 8 Cyl 4.9 L GAS
View related parts
Cadillac Seville Throttle Body Part Number: 17095168
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS
View related parts
Cadillac Seville Fuel Pressure Regulator Part Number: 17078262
Product Specifications
- Other Name: Body, Throttle Body/Carburetor; Fuel Meter; Body Kit; Metering Assembly; Throttle Body/Carburetor.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Cadillac Seville | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Cadillac Seville Throttle Body Part Number: 12560099
Product Specifications
- Other Name: Body, Fuel Injection Air Meter
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Cadillac Seville | SLS, STS | 8 Cyl 4.6 L GAS

Cadillac Seville Throttle Body

Want to cut long-term maintenance and repair costs? Choose OEM Throttle Body. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Seville parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Seville Throttle Body includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Cadillac Seville Throttle Body Parts Questions & Experts Answers

Throttle Body
12560099
Q: How to service the throttle body on Cadillac Seville?
A:
To service the Throttle Body, remove the maf sensor electrical connector, do not score the maf sensor screen, doing so will cause restricted air flow and driveability problems. Lose the intake air duct clamps and remove the mass airflow (MAF) sensor and air cleaner intake duct as a unit. Check the Throttle Body bore & throttle valve plate for deposits and open throttle valve to inspect all surfaces. Do not allow any solvent with methyl ethyl ketone (MEK) in it to avoid damage to the components of the fuel system. Clean the Throttle Body bore and throttle valve plate using a clean towel to wipe using gm top engine cleaner (P/N 1052626 Canada P/N 9g3026), ac-delco carburetor tune-up conditioner (PIN X66-P), or equivalent product. For installation, ensure that outlet of the air cleaner assembly and the maf sensor inlet duct is aligned to reduce incorrect airflow readings that trigger mil or cause driveability issues. Install the maf sensor and air cleaner intake duct in an assembly before clamping the intake air duct clamps to 3 nm (27 lb in) before reattaching the maf sensor electrical connector.